Who Make's this tool

[scope eye]

That you can hold a brass case in drill, it's like a shell holder with an mandrel on it.

Dean

 

[savagedasher]

That you can hold a brass case in drill, it's like a shell holder with an mandrel on it.

Dean

I like the lee because it doesn't take all the different case holders . Larry

 

[scope eye]

Is that the one that looks like a Chinese finger trap, for lack of a better term.

Dean

 

[brokeasajoke]

K&M and they use the lee auto prime shell holders http://kmshooting.com/power-adapter-and-shell-holder.html i think brunoshooters sells them

 

[savagedasher]

Is that the one that looks like a Chinese finger trap, for lack of a better term.

 

[savagedasher]

Yes Larry

 

[scope eye]

Is the the holder ans the mandrel sold separately?

Dean

 

[savagedasher]

Is the the holder ans the mandrel sold separately?

Dean

All one piece . They work fine . If you're going to do large amount the with adapters is best . Larry

 

[scope eye]

Do I need both of these. sorry I don't know why I am having so much trouble with this.

http://www.midwayusa.com/product/983402/lee-deluxe-power-quick-trim-lock-stud
http://www.midwayusa.com/product/352653/lee-zip-trim-case-trimmer-universal-3-jaw-chuck-case-holder

Dean

 

[savagedasher]

Do I need both of these. sorry I don't know why I am having so much trouble with this.

http://www.midwayusa.com/product/983402/lee-deluxe-power-quick-trim-lock-stud
http://www.midwayusa.com/product/352653/lee-zip-trim-case-trimmer-universal-3-jaw-chuck-case-holder

Dean

I have the zip trim it works fine .

 

[scope eye]

Thanks for putting up with me.

Dean

 

[savagedasher]

Thanks for putting up with me.

Dean

No problem lee make some good products .
Larry

 

[zipollini]

Be sure to check this out also.

http://www.xxicsi.com/case-holder-and-drivers.html

 

[Dusty Stevens]

Be sure to check this out also.

http://www.xxicsi.com/case-holder-and-drivers.html

Only buy this if you plan on not stockpiling a bunch of cheap crap that halfway works if you didnt have anything else. Its the last one youll buy.

 

[jimbires]

I use this one .

http://www.rwhart.com/store/proddetail.asp?prod=RWH-F-H45

 

[itchyTF]

Sinclair also makes them -
http://www.sinclairintl.com/reloadi...es/sinclair-driver-caseholders-prod33962.aspx

 

[billlarson]

That you can hold a brass case in drill, it's like a shell holder with an mandrel on it.

Dean

FORESTOR

 

[ireload2]

This one works pretty well for most mundane uses. I would no use it for case neck turning but it works ok for spinning cases while annealing.

 

[P1ZombieKiller]

are you asking about this?

http://www.pmatool.com/caseholders-and-drivers-1/

 

[distantfoe]

If only the hart (and PMA I would guess by looking at it) didn't use the primer pocket as a way to pin the case against the shell holder. It tends to ream the pocket out or at least bevel it, not good.