Best Primer pocket uniformer

[bench]

Who makes the best primer pocket uniformer for depth of cut?
I dont want one that takes metal off the side walls of the pocket and makes for loose pockets.

Thanks

 

[savagedasher]

Any primer pocket tool will cut the side if is not used correctly. Larry

 

[bench]

Any primer pocket tool will cut the side if is not used correctly. Larry

Would you like to expand on that answer on how to control to much removal of brass for the side of the pockets.
Thanks

 

[savagedasher]

The tool only cuts on the face. Keep it vertical and don't gouge the sides. Larry

 

[Gabe22BR]

Redding

 

[bench]

The tool only cuts on the face. Keep it vertical and don't gouge the sides. Larry

Just found what I was looking for on 21st century a adjustable depth uniformer

 

[savagedasher]

Just found what I was looking for on 21st century a adjustable depth uniformer

I don't have one that isn't adjustable .
Larry

 

[fastarget]

I have had excellent luck with K&M, purchased one for LP, liked it enough that I later picked one up for Small primers.

http://kmshooting.com/primer-tools-...arge-rifle-primer-pocket-correction-tool.html

 

[CaptainMal]

K&M Products. All you need to know.

 

[Dans40X]

All the K&M products that I use have served me well for the past 30yrs.

 

[gotcha]

The 21st century tool is VERY nice. R.W. Hart has a new one that is similar and less expensive with carbide cutter. It has a hex fitting on one end for chucking up and is adjustable for depth via a longitudinal screw plus a set screw. Both are easy to set cut depth to .0005" ........ If you're cutting pockets to both SAAMI & SIP standards the ease of adjustability is important. R.W. Hart doesn't have their new tool pictured on their web site yet.................. Just bought one and very pleased with it compared to my old K&M.

 

[DeltaBravo]

I've got the PMA "PPC" version that is slightly smaller than a normal small rifle primer size and it does a great job on my Lapua 6BR brass.

Dennis

 

[savagedasher]

I've got the PMA "PPC" version that is slightly smaller than a normal small rifle primer size and it does a great job on my Lapua 6BR brass.

Dennis

Regardless what kind u use I have found its best to do the pockets after the case has Ben fired . Larry

 

[Grimstod]

Anyone tryied Lymans? I have one. Wonderign if i bought a good one.

 

[rogn]

I wish they still made the Whitetail.

 

[Dusty Stevens]

I wish they still made the Whitetail.

You want one?

 

[BigBlueandGoldie]

I really like the Sinclair uniformers with power drill attachment. I don't know how they compare to the others, but I have nothing negative to say about them.

 

[dkhunt14]

I have a K&M, a Sinclair and a Hart. I like all of them. They all do a good job. I use the Hart with a carbide cutter to clean the pockets before loading. Matt

 

[Hoot]

Almost 10 years ago, I bought a large/small set from This Fellow on ebay. The workmanship is great and there are cutters on both ends, for when one end gets dull. I have yet to need to reverse the cutter as the original ends are still going strong. Glad to see him still in business as I believe a good product should be promoted.

Hoot

 

[hogpatrol]

Another vote for the 21st Century.