Anyone recognize these barrel threads?

[OIF/OEF]

I purchased a used Krieger barrel chambered in 22 PPC a while back for a really good deal with hopes of rechambering it to 22-250 or something.

The current barrel threads are 16TPI with 1.000 inch diameter threads plus or minus .003. I apologize if its easy to figure out Ive searched on here and on google and cannot figure out what action these threads fit. It really doesn't matter I guess but its killing me to figure this out. Thanks for any help

 

[BoydAllen]

Winchester model 70?

 

[bobm]

Ruger 77 is 1.00 x 16, M70 also.

 

[BoydAllen]

People put Kriegers on Rugers? Really? Just kidding, but I will say that I have never seen one.

 

[357Mag]

Howdy -

Wichita WBR1375, some Sakos; and perhaps Hall " B" ( the latter, if my memory serves right ) .


With regards,
357Mag

 

[CatShooter]

I purchased a used Krieger barrel chambered in 22 PPC a while back for a really good deal with hopes of rechambering it to 22-250 or something.

The current barrel threads are 16TPI with 1.000 inch diameter threads plus or minus .003. I apologize if its easy to figure out Ive searched on here and on google and cannot figure out what action these threads fit. It really doesn't matter I guess but its killing me to figure this out. Thanks for any help

Are they square cut or "V" cut? Winchester threads are square cut.

 

[CatShooter]

People put Kriegers on Rugers? Really? Just kidding, but I will say that I have never seen one.

;D ;D ;D ;D ;D

 

[butchlambert]

I purchased a used Krieger barrel chambered in 22 PPC a while back for a really good deal with hopes of rechambering it to 22-250 or something.

The current barrel threads are 16TPI with 1.000 inch diameter threads plus or minus .003. I apologize if its easy to figure out Ive searched on here and on google and cannot figure out what action these threads fit. It really doesn't matter I guess but its killing me to figure this out. Thanks for any help

Are they square cut or "V" cut? Winchester threads are square cut.

Square cut??

 

[Pres100]

Is that like the threads of my adjustable crescent wrench?

just kidding of course.

 

[butchlambert]

NO!, they ain't square threads.

 

[afrench]

Hall.

 

[CatShooter]

I purchased a used Krieger barrel chambered in 22 PPC a while back for a really good deal with hopes of rechambering it to 22-250 or something.

The current barrel threads are 16TPI with 1.000 inch diameter threads plus or minus .003. I apologize if its easy to figure out Ive searched on here and on google and cannot figure out what action these threads fit. It really doesn't matter I guess but its killing me to figure this out. Thanks for any help

Are they square cut or "V" cut? Winchester threads are square cut.

Square cut??

The early 70s were square cut.

 

[OIF/OEF]

I was told by the seller he thinks it came off of a Wichita Action.....I wanted to double check by posting this question I knew someone from here would know. The diameter seems a little bit small yeah???

 

[BoydAllen]

I believe that they have that in common with Halls, and Model 70s, so no, not small, actually fairly common.

 

[OIF/OEF]

Thanks Sir

 

[butchlambert]

I purchased a used Krieger barrel chambered in 22 PPC a while back for a really good deal with hopes of rechambering it to 22-250 or something.

The current barrel threads are 16TPI with 1.000 inch diameter threads plus or minus .003. I apologize if its easy to figure out Ive searched on here and on google and cannot figure out what action these threads fit. It really doesn't matter I guess but its killing me to figure this out. Thanks for any help

Are they square cut or "V" cut? Winchester threads are square cut.


And the source of your information?

Square cut??

The early 70s were square cut.

And the source of your information?

 

[CatShooter]

I purchased a used Krieger barrel chambered in 22 PPC a while back for a really good deal with hopes of rechambering it to 22-250 or something.

The current barrel threads are 16TPI with 1.000 inch diameter threads plus or minus .003. I apologize if its easy to figure out Ive searched on here and on google and cannot figure out what action these threads fit. It really doesn't matter I guess but its killing me to figure this out. Thanks for any help

Are they square cut or "V" cut? Winchester threads are square cut.


And the source of your information?

Square cut??

The early 70s were square cut.

And the source of your information?

A foggy memory... I did my apprentice in 1959 Sorry.

 

[dmoran]

Are they square cut or "V" cut? Winchester threads are square cut.

Since when?
What is your source to this?
I've never seen a Winchester barrel or action with "square cut threads".

 

[butchlambert]

Donovan, I was wrong. They have square threads only it is on the bolt shroud.

 

[Shynloco]

People put Kriegers on Rugers? Really? Just kidding, but I will say that I have never seen one.

Ouch! Boyd....You really know how to hurt some folks... 8))

Alex