I just bought a RCBS Trim Pro 2 case length trimmer. After looking around, I see they make a 3 way cutter to trim to length, chamfer, and debur in the same step.
I haven't seen the 3 way cutter in hand, but it looks like the one cutter could be used to neck turn if the case length carbide cutter was removed. I looked around a bit, and it seems RCBS offers a neck turning attachment as well, but it's a case mouth reamer as opposed to a neck turner (unless I misread). Can someone point me in the right direction if there is an option. Or has anyone used a similar trimmer to mount another neck turner (21st century / KM / etc) to turn the RCBS length trimmer into a neck turning lathe?
As always, thanks in advance.
http://www.brownells.com/reloading/...s/case-neck-turner-attachments-prod37394.aspx
https://www.midwayusa.com/product/132686/rcbs-trim-pro-case-trimmer-3-way-cutter-6mm
I haven't seen the 3 way cutter in hand, but it looks like the one cutter could be used to neck turn if the case length carbide cutter was removed. I looked around a bit, and it seems RCBS offers a neck turning attachment as well, but it's a case mouth reamer as opposed to a neck turner (unless I misread). Can someone point me in the right direction if there is an option. Or has anyone used a similar trimmer to mount another neck turner (21st century / KM / etc) to turn the RCBS length trimmer into a neck turning lathe?
As always, thanks in advance.
http://www.brownells.com/reloading/...s/case-neck-turner-attachments-prod37394.aspx
https://www.midwayusa.com/product/132686/rcbs-trim-pro-case-trimmer-3-way-cutter-6mm
