22 Creedmoor / Savage small shank

Discussion in 'Gun Project Questions & Gunsmithing' started by Stickler, Feb 10, 2020.

  1. Stickler

    Stickler Gold $$ Contributor

    Joined:
    Mar 8, 2015
    Messages:
    64
    Considering re-barreling one of my Savage 12 actions to 22 CM and was wondering if the high chamber pressure(s) have been an issue for anyone?
     
    Stickler, Feb 10, 2020
    #1
  2. gman47564

    gman47564

    Joined:
    Oct 7, 2019
    Messages:
    234
    you wont have any issues with your model 12 action...
     
    gman47564, Feb 10, 2020
    #2
    Stan Taylor likes this.
  3. nmkid

    nmkid Gold $$ Contributor

    Joined:
    Dec 31, 2014
    Messages:
    2,673
    No problems and I run my 22 Creedmoor pretty warm and my Savage action.
     
    nmkid, Feb 14, 2020
    #3
  4. Stickler

    Stickler Gold $$ Contributor

    Joined:
    Mar 8, 2015
    Messages:
    64
    Thank you gentlemen!
     
    Stickler, Feb 14, 2020
    #4
  5. wwbrown

    wwbrown Silver $$ Contributor

    Joined:
    May 25, 2009
    Messages:
    544
    You may find that you have better luck if you get a bushing installed on the bolt to reduce the clearance between the firing pin and the hole for it. The one common problem I have seen amongst factory Savages is blanked primers and this is usually solved by a little bolt magic. A number of the people who post here do bolt bushing jobs at a high quality.
     
    wwbrown, Feb 14, 2020
    #5

Share This Page