204 Ruger Loaders Question

Discussion in 'Small Stuff--22s, 20s, and 17s' started by Mark McMahon, Jun 10, 2019.

  1. 6xcshooter

    6xcshooter

    Joined:
    Aug 16, 2013
    Messages:
    452
    39gr sierra blitzking
    25gr 10X
    Cci sr primer
    .010 off lands
    Winchester or norma brass
    Look no further just shoot it
     
    long40shot likes this.
  2. RedfootRanch

    RedfootRanch Silver $$ Contributor

    Joined:
    Dec 13, 2017
    Messages:
    32
    6xc...have you found the 10X to be extremely dirty. I have heard many express that it is terribly filthy.

    I picked up a lb to test with some 24 NTX's but have not opened after hearing about it. I would think it is a mite too fast for 39 SBK's?

    Thanks!
     
  3. Hippy

    Hippy

    Joined:
    Feb 7, 2006
    Messages:
    227
    Benchmark or H-4895 W/39 gr Sierra Winchester Brass 7 1/2 - Brass prepped, OAL not really a issue with Two XR-100 will agg in low .3 . 10X is close and Ideal w/32 gr projectiles

    Jim
     
  4. Damon555

    Damon555

    Joined:
    Oct 26, 2014
    Messages:
    234
    32 grain Vmax, 28.0 grains of WC844 (H335), CCI450 primers, RP brass with a COAL base to tip 2.260". There really isn't much room to move those small bullets around in the neck...I'd be willing to bet that the book overall length of 2.250"+/- would be a very good place to start.

    Factory Remington 700 SPS Varmint
     
  5. 6xcshooter

    6xcshooter

    Joined:
    Aug 16, 2013
    Messages:
    452
    10x isnt dirty in my experiences with it for years of use.
     
    RedfootRanch likes this.

Share This Page