This is the Sinclair Competition Shooting rest, their top of the line front rest, see
https://www.sinclairintl.com/shooti...lair-competition-shooting-rest-prod39322.aspx
I also have the brochure for the rest, which describes its assembly, parts and set-up.
It has the Edgewood front benchrest bag, which calls for a 3 inch fore-end, see
https://www.sinclairintl.com/shooti...orend-sku749009465-39557-72337.aspx?rrec=true
I can include a Protektor DR rear bag, in leather (including leather ears, not cordura), see
product no. 749-007-537WS , at https://www.sinclairintl.com/shooting-rests-bipods/benchrest-bags/rear-bags/dr-bag-prod37693.aspx
already filled with heavy sand, https://www.sinclairintl.com/search/index.htm?k=heavy+sand&ksubmit=y
There are 3 Caldwell non-skid rubber covered washer/footrests in the photos, for shooting on concrete benches, and two homemade height extenders for the front leg screws, which I used in grass for F-class shooting. I have a washer/riser on the speed-screw as well.
This is all in lightly used and fully serviceable original condition, the only replacement part is the lock nut on the left front leg screw, which is a hex nut instead of the round knurled nut.
I bought all this from Sinclair at full list (except for the rear bag, which I purchased lightly used, filled with heavy sand). Light use for two years in local F class shooting. I am asking $425 for the above described lot. Attached are some photos , let me know if you have questions. More photos available. I am in Southern Coastal Maine, so a nearby transaction would be most economical, I do not have a figure for shipping charges, but these items are heavy.
Thanks, Ed333


https://www.sinclairintl.com/shooti...lair-competition-shooting-rest-prod39322.aspx
I also have the brochure for the rest, which describes its assembly, parts and set-up.
It has the Edgewood front benchrest bag, which calls for a 3 inch fore-end, see
https://www.sinclairintl.com/shooti...orend-sku749009465-39557-72337.aspx?rrec=true
I can include a Protektor DR rear bag, in leather (including leather ears, not cordura), see
product no. 749-007-537WS , at https://www.sinclairintl.com/shooting-rests-bipods/benchrest-bags/rear-bags/dr-bag-prod37693.aspx
already filled with heavy sand, https://www.sinclairintl.com/search/index.htm?k=heavy+sand&ksubmit=y
There are 3 Caldwell non-skid rubber covered washer/footrests in the photos, for shooting on concrete benches, and two homemade height extenders for the front leg screws, which I used in grass for F-class shooting. I have a washer/riser on the speed-screw as well.
This is all in lightly used and fully serviceable original condition, the only replacement part is the lock nut on the left front leg screw, which is a hex nut instead of the round knurled nut.
I bought all this from Sinclair at full list (except for the rear bag, which I purchased lightly used, filled with heavy sand). Light use for two years in local F class shooting. I am asking $425 for the above described lot. Attached are some photos , let me know if you have questions. More photos available. I am in Southern Coastal Maine, so a nearby transaction would be most economical, I do not have a figure for shipping charges, but these items are heavy.
Thanks, Ed333

