Seating depth test......6 Dasher. 1x fired brass. I did a quick charge test and found a prelim load of Varget. Going to test +.025, +.015, +.005 in , and -.005 and -.015 out. 5 shots of each (to start)
Would you rather.....
1) Warm up gun and shoot five 5 shot groups ( groups spaced out, time wise) at 1000 Yards. On the plus side you could measure group size and shape and minimize wind effects. BUT......the fouling effect from first group to last could factor in.
OR
2 Paint bullet tips and warm up gun and shoot all in a row round robin (spaced out timewise) at 1000 Yards. Plus side....negate the fouling effect first to last group....BUT group size is out the window over a 30ish min string. Looking strictly at the amount of vertical within each group.
I have my own range and have the ability to shoot at night to help negate wind if needed Just need to find a mirage friendly night.
What say you?
Would you rather.....
1) Warm up gun and shoot five 5 shot groups ( groups spaced out, time wise) at 1000 Yards. On the plus side you could measure group size and shape and minimize wind effects. BUT......the fouling effect from first group to last could factor in.
OR
2 Paint bullet tips and warm up gun and shoot all in a row round robin (spaced out timewise) at 1000 Yards. Plus side....negate the fouling effect first to last group....BUT group size is out the window over a 30ish min string. Looking strictly at the amount of vertical within each group.
I have my own range and have the ability to shoot at night to help negate wind if needed Just need to find a mirage friendly night.
What say you?
Last edited: