Wilson seater die holder?

[robinzon]

Hey guys I have 4 Wilson micrometer sweaters at this point was wondering if anyone makes (commercial) or someone here has made a die holder for these ? Something similar to say a lee round die box for Lee turret press a wooden holder with holes etc ... I prefer plastic vertical storage that can fit several dies

 

[JFrank]

www.lewilson.com has the yellow hard cases for their sets, I own a couple so I can say there not too bad at all

 

[Dusty Stevens]

Use some spade bits on a chunk of wood

 

[robinzon]

I found this tip on another thread... you can use a Plano 4-16 Lure Case (3700 series Plano) to nicely fit 4 Wilson seater dies with boxes even.

https://www.amazon.com/gp/product/B000E39T5U/?tag=accuratescom-20

It is truly an awesome solution, as a matter of fact Redding competition dies (which are very long) can sit there there too.... the included dividers (used for fishing lure storage) can be used to adjust the length of the 4 compartments to your liking.

 

[divingin]

How about screwing 4 empty cases to a board and dropping the dies over them?

 

[robinzon]

How about screwing 4 empty cases to a board and dropping the dies over them?

Interesting thought but considering they are all very different calibers you would have to remember which one goes where LOL but it is a very interesting suggestion (besides scratching the inside would not be good)

 

[MislMan]

How about a piece of 2”x4” wood and wood dowels.

 

[Fast14riot]

I work in the plastics industry and do lots of fabrication, too. You've given me some ideas, I'll see what I can come up with. Maybe offer up something inexpensive or at least easy to make on your own.

Do you use the base that comes with the dies?

 

[foxguy]

I work in the plastics industry and do lots of fabrication, too. You've given me some ideas, I'll see what I can come up with. Maybe offer up something inexpensive or at least easy to make on your own.

Do you use the base that comes with the dies?

-

Yes

 

[JFrank]

This is Wilson’s die case, they seem to have it figured out fairly well. Sure beats the cardboard box’s laying all over the house.​

 

[JMayo]

I have two sets of two. The yellow boxs they came in lay open in a drawer lined up nicely.