What does this barrel fit

[30EX]

What does this barrel fit, tried on a Win M70, Rem/Hart and Defiance, no go

Specs;
1.090” thread depth
1.120”x 20 shank
.900” shank length

 

[akajun]

Aren’t savage 20tpi? Maybe somebody deleted the nut system

 

[30EX]

Aren’t savage 20tpi? Maybe somebody deleted the nut system

They are, but no nut used on this setup, I don’t think this was on a Savage

 

[WSnyder]

Isn't a large tenon Savage 1.120" x 20 TPI? Probably one of those with nut delete as mentioned above.

 

[30EX]

Isn't a large tenon Savage 1.120" x 20 TPI? Probably one of those with nut delete as mentioned above.

After you add the lug you don’t have much shank length left, I am not a Savage guy, but if you guys say that's what it's from, so be it

 

[WSnyder]

After you add the lug you don’t have much shank length left

Exactly. Depending on recoil lug thickness you are in the neighborhood of .700" in the action which is about what a Savage is.

 

[DHuffman]

Isn't a large tenon Savage 1.120" x 20 TPI? Probably one of those with nut delete as mentioned above.

Shouldered (no nut) large shank Savage is my guess as well

 

[DHuffman]

After you add the lug you don’t have much shank length left, I am not a Savage guy, but if you guys say that's what it's from, so be it

I've got one 120 miles away or I'd go measure it but that's my guess

 

[WSnyder]

but if you guys say that's what it's from, so be it

It may not be but it's right there with what a large shank Savage would be. I have a small shank Savage on the shelf in a box and could measure it but the tenon length in the action give or take is .700" ish.

I just don't recall anything with large shank with 20TPI other than Savage. All of the LR and ELR actions I can think of are 16TPI. Bat's are all 16TPI. Lawton had large shank models and I believe they were 16TPI as well. Stillers large shanks were/are 16TPI.

Mby someone else has more ideas.

 

[30EX]

Well it looks like there enough meat to put on a Rem

 

[Fuj]

What you have there is a Savage large shank cut for shouldering.
I've been known to turn a few. What is it chambered for, and who
did you get it from. It's not one of mine.

 

[30EX]

What you have there is a Savage large shank cut for shouldering.
I've been known to turn a few. What is it chambered for, and who
did you get it from. It's not one of mine.

Wenatchee, Washington

 

[SKWERLZ]

Wenatchee, Washington
View attachment 1678259View attachment 1678260View attachment 1678261View attachment 1678262

I love the Wenatchee area.
6BRA is super fun.

 

[30EX]

I love the Wenatchee area.
6BRA is super fun.

I bought it from a guy that’s cleaning out a gunsmiths estate, hoping there’s more