What bolt release for a nesika model K

[mao0720]

I may be switching my FTR rifle out of my Eliseo chassis and into a conventional stock, but in the last 5 years I have misplaced the original bolt stop for the Nesika model K action (SD made action). I have called nesika 3 times in the past 3 weeks and have spoken to the same person each time who says he will forward my information to the sales person, but I have yet to receive a call back. Does anyone know if pacific tool and gauge or another manufacturer makes a bolt stop that will fit a nesika K action? I see PTG makes a Lawton style bolt stop, could this work? Thanks a lot for any help!
Mason

 

[Eddie Harren]

http://defiancemachine.com/contact/

Call and ask Glenn. He would know.

 

[mao0720]

Finally got an email back from a Remington custom shop rep yesterday so we'll see what happens. If I have now luck, I'll try defiance. Thanks for the heads up.

 

[Eddie Harren]

Finally got an email back from a Remington custom shop rep yesterday so we'll see what happens. If I have now luck, I'll try defiance. Thanks for the heads up.

Remington custom shop is going to help you with a Nesika action?

The reason I suggested Defiance and Glenn is because he was the originator of the Nesika Bay actions.

 

[GLZ]

Remington custom shop is going to help you with a Nesika action?

The reason I suggested Defiance and Glenn is because he was the originator of the Nesika Bay actions.

Remington now owns Nesika, along with a whole host of manufacturers.

 

[swd]

Wait a couple more weeks and try calling again. I needed some main springs for my J's last year and had the same problem until I got ahold of someone else.

 

[Eddie Harren]

Remington now owns Nesika, along with a whole host of manufacturers.

CERBERUS owns them all. Are Nesikas still made by Dakota?

 

[mao0720]

Nesika is now part of Dakota which is part of Remington. Both nesika and Dakota are run along side Remington's custom shop.

 

[Eddie Harren]

Nesika is now part of Dakota which is part of Remington. Both nesika and Dakota are run along side Remington's custom shop.

I guess I learn something everyday. Thanks, Eddie.

 

[GenePoole]

I may be switching my FTR rifle out of my Eliseo chassis and into a conventional stock, but in the last 5 years I have misplaced the original bolt stop for the Nesika model K action (SD made action). I have called nesika 3 times in the past 3 weeks and have spoken to the same person each time who says he will forward my information to the sales person, but I have yet to receive a call back. Does anyone know if pacific tool and gauge or another manufacturer makes a bolt stop that will fit a nesika K action? I see PTG makes a Lawton style bolt stop, could this work? Thanks a lot for any help!
Mason

Looking at my print for the Lawton bolt-stop from PTG and info I found on another forum, I can say that the Lawton part will not fit a cutout for a Nesika. Here's the info I found on making a cutout on a R700 action for the Nesika part:

http://www.saubier.com/forum/showthread.php?t=363

And here is the info I have for the Lawton cutout for a R700:

 

[swd]

I was just working on a Borden BRM for a friend and had the bolt release out. I went ahead and checked it against one of my Nesika J's and it's exactly the same other than the Borden doesn't have the oblonged hole for the pin. Works just fine.

 

[madmixerman]

Good luck with Nesika. I called for a firing pin mainspring .First call I talked to a guy that took my name and number and told me someone would call. After a week I tried calling. After 10 phone calls with no answer and 2 emails with no answer I gave up. Been 2months now with no reply. Like I said good luck.