What 1 to work with?

[Link]

Doing a depth test with my 6br. What one would you work with and what would you change? 100 yards. Varget 31.0gr. 2 different bullets a boat tail & flat base.

 

[Ccrider]

What order did you shoot these?

 

[6BRA]

Freebore? Varget alternative for light bullet? Arcomp h4895 8208?

 

[Link]

What order did you shoot these?

As numbered on the 2 targets.

 

[Ccrider]

I would shoot 6 and 9 to see if they repeated. If they did I would work in those areas.

 

[jelenko]

Looks like 10 to me. The POI of 9, 10 and 11 look to be the closest.

 

[Clancy]

Ehhhhh 2.796 on bottom and 2.810 on top?

You really need to get some N135.

Varget is still super overrated! On a decent day, 2 shot depth tests with N135 will yield all .0 and .1 with a sound rifle.

 

[Link]

Freebore? Varget alternative for light bullet? Arcomp h4895 8208?

Trying to get it to shoot the best I can with the powder I have - Varget. I know there is better choices.

 

[10XSHOOTER]

#2 is better than #9
I'd look at #2 and #6

 

[Schippergreg]

I’d try 2813 with the barts. #5 and 6 impacted the same place. More powder may have taken the vertical out of 5. After that I’d move to 3 shot groups, adjusting powder by .2. Then verify with 5 shot groups. This is all assuming you are shooting over flags.

 

[Clancy]

Trying to get it to shoot the best I can with the powder I have - Varget. I know there is better choices.

Ain’t nothin wrong with burning up some powder! I’d go with the depths I mentioned above.

 

[JMayo]

5,6,11 have the same attitude.
That where I'd work in bto.
Couple clicks on the scope they would be x's

 

[Ccrider]

Different bullets on each target, right?

2 shot groups at 100 yards should be 1 hole.

 

[Link]

Different bullets on each target, right?

2 shot groups at 100 yards should be 1 hole.

Right