Weaver T36 turrets?

[Josh11]

Does anyone have a way to fix or can I buy a target turret. I dont like the turret that comes with them. It goes up to four and then four again and then back down to 0. Heres what I mean. 0-4,4-0. This is a little confusing to me. I would like one that maybe went to 10 or just starts over at 0. Let me know what you guys think. Or if I make any since at all.

 

[ronfoster]

are your turrets from a silver model? if so you can call Weaver and ask them to send you set of the black ones and install them. they don't look as nice, but you can't see them when the caps are on. thats what I did, and it worked fine. I don't think they even charged me. ronfoster

 

[zullo74]

You are not understanding what he said. The numbers are not continuous from let's say 0-10. They go from 0-4 and from 4-0 and then there is a space. That is what is confusing him. I have the black model. BTW, the target turrets replace the standard turrets and do not use the caps.

 

[ronfoster]

I understand what he is saying. I have a t36 that came with the same target knobs he has and I did not like the numbering system either. Weaver makes two different knobs in the black, a large one and one that can be covered by cap. the numbers go around the barrel in sequence from 0 t0 8 in1/8 min.increments,for a total of 9 mins. per revolution. these are the same as on my weaver T24. THEY WORK QUITE WELL. RONFOSTER

 

[zullo74]

The small knobs (that can fit under the covers) that came with my black T-36 are numbered the same way as the target knobs.

 

[Josh11]

thats true. but both my sets are numbered this way.

 

[zullo74]

So are mine. That's what I said above.