Warne rings for F-Class barrel switch rifle??

[ihmsakiwi]

Hi Guys,

I have Warne rings on my Barnard actioned 6mmBR F-class rifle and want to change out the barrel to my 284 Winchester barrel the first time.

I assume I will need to re-zero each time with these when changing barrels as again I assume I need to loosen both top & bottom screws when removing the scope?
I know some people leave the scope on the action when changing barrels but being the klutz I am I think it will be safer to remove it.
Apologies for the question but it is currently dialed in and I don't want to unnecessarily disturb it to check.

Peter

 

[argh]

Leave the scope on the action, its not hard to screw barrels on and out. And yes you will work out the scopes will be different zeros.. set the zero for your most used barrel, the work out the difference for other barrels. ie, my 308 barrel is set 0 for 300m zero, and all my come ups are from that. My 6mm barrel is 6min. Left, but almost the same vertical come ups at 600m (i have other ranges listed)
When switching between barrels, its very consistent return to zero.