Wanting to Modify this Rem 40X SA into an LA.

[VaniB]

Has anybody out there ever gutted out their wood short action stock to convert it to a long action?

This is a sample photo of the kind of 40x style stock that I bought for $60 shipped on GunBroker some years ago. But it is really beat to heck with a chopped butt stock. I like the heft and wide flat bottom of this stock for stability, and I plan to use autobody glass and paint to transform it back into a thing of beauty for my .284 project. I've placed this SA 40X stock right next to a LA 700 HS stock to see how the cut-outs line up, and I can't see why it shouldn't work if I gut out the stock. This 40X SA stock is still 1" longer in overall length then the HS Long Action stock too....so no loss of forearm grip area.

It looks to me like the new screw hole location is going to be practically touching the existing SA recoil lug slot. And of course I will have to move up the location of the LA recoil slot too, and just fill in the old SA recoil slot with Devcon. I'm not too worried about gutting out all the wood and causing structural weakness, as there seems to be plenty of hard wood left over, and I intend to fill in and glass everything with Decon 10110.

So, it looks feasible to me, but would like to hear if somebody out there has done it.

 

[butchlambert]

Jump right in.

 

[fkimble@charter.net]

Sure it can be done.Just need to relocate the front action bolt hole and lug recess forward. I recently picked up a similar stock that was originally a SA, then modified for a long action, then modified back to SA. With the action installed the only thing visible is a round grey circle where the LA front bolt hole was located.