Vudoo action versions

[XTR]

I understand that Voodoo makes 60* and 90* actions in single shot and repeater. Have they updated the actions along the way? I’ve seen reference to Gen1. What updates have they done?

 

[jpx2rk]

search vudoo here and there are two long threads on Snipers Hide about the different models/versions they offer.

 

[XTR]

I've searched here, haven't been able to locate a thread discussing the versions. Wading into SH is kind of like diving the sanitary tank on a sub. You may find what you are looking for but you have to wade through the crap.

(reaches for an EAB)

 

[Rob01]

4 years of posts and 178 pages. Have fun in the most informative sanitary tank you will ever find.

DeLane Development Group Rimfire Ventures

Ok, no more drip feeding, it's time for full fire hose. The VGW V-22 is a true-to-scale mid-lock rimfire bolt action with integral recoil lug. One of the many unique features of this design is, for a mid-lock, there are no lug ways forward of the lug abutment in the receiver. The rail is...

www.snipershide.com

 

[XTR]

For anyone else who is interested and doesn't want to search SH half a dozen different ways till they find it.

Apr 28, 2020

Gen 1: Cocking piece is pinned to firing pin, a la Remington DNA. Bolt shroud is threaded into bolt body via 1/2-20 threads. Bolt nose is captured via two pins, a la Remington 40X. I've spoken in the past that when I started this project, it was to re-introduce the 40X, but ultimately went a different route. The fire control was the only remaining Remington DNA from what was the original project.

Gen 1.2: Cocking piece is threaded to firing pin via 1/4-48 threads and secured with set screw through bottom of cocking piece. Shroud remains threaded into bolt body via 1/2-20 threads. Bolt nose remains captured via two pins.

Gen 2: Cocking piece is threaded to firing pin via 1/4-48 threads and secured with set screw through bottom of cocking piece. Shroud is captured in bolt body via a locking lug, providing rapid tool-less disassembly. Bolt nose is captured via two locking lugs providing rapid tool-less disassembly.

The Gen 2 fire control system is a product of R&D put into the V-22S and rolled backwards into the repeater platforms. In the V-22S, the cocking piece has a vertical sear face that requires the Vudoo/Flavio trigger. I've been asked if other triggers can be used in the V-22S and the answer is, yes, they can, but it will require the use of the Vudoo cocking piece with the 60 degree sear surface.

Very soon, we'll also have a Vudoo/Flavio trigger for the repeaters which will also use the vertical sear.


Rob, it wasn't in that thread, at least not that I could find. And as far as I was able to surmise there isn't a way to search inside individual threads. When it's 178 pages that might be useful.

 

[jpx2rk]

Roam around over at RFC as well:
https://www.rimfirecentral.com/forums/forumdisplay.php?f=142

 

[BP1]

For anyone else who is interested and doesn't want to search SH half a dozen different ways till they find it.

Apr 28, 2020

Gen 1: Cocking piece is pinned to firing pin, a la Remington DNA. Bolt shroud is threaded into bolt body via 1/2-20 threads. Bolt nose is captured via two pins, a la Remington 40X. I've spoken in the past that when I started this project, it was to re-introduce the 40X, but ultimately went a different route. The fire control was the only remaining Remington DNA from what was the original project.

Gen 1.2: Cocking piece is threaded to firing pin via 1/4-48 threads and secured with set screw through bottom of cocking piece. Shroud remains threaded into bolt body via 1/2-20 threads. Bolt nose remains captured via two pins.

Gen 2: Cocking piece is threaded to firing pin via 1/4-48 threads and secured with set screw through bottom of cocking piece. Shroud is captured in bolt body via a locking lug, providing rapid tool-less disassembly. Bolt nose is captured via two locking lugs providing rapid tool-less disassembly.

The Gen 2 fire control system is a product of R&D put into the V-22S and rolled backwards into the repeater platforms. In the V-22S, the cocking piece has a vertical sear face that requires the Vudoo/Flavio trigger. I've been asked if other triggers can be used in the V-22S and the answer is, yes, they can, but it will require the use of the Vudoo cocking piece with the 60 degree sear surface.

Very soon, we'll also have a Vudoo/Flavio trigger for the repeaters which will also use the vertical sear.


Rob, it wasn't in that thread, at least not that I could find. And as far as I was able to surmise there isn't a way to search inside individual threads. When it's 178 pages that might be useful.

Wade that pretty much sums it up,I have a gen1 in a manners T2a with APA bottom metal and a 3x18 gen 2 vortex razor with a 18” MTU Bartlein on it and it will put a smile on your face..I wouldn’t worry to much about the different versions they will all shoot.

 

[Jarhead6870]

Another change in the Vudoo was going from a flat breach to a cone breach.

 

[Rob01]

Another change in the Vudoo was going from a flat breach to a cone breach.

Yup that happened a few years back. A more defined cone first and then a wider design which is what is used now. I used the flat for thousands of rounds and never an issue before going coned.