V3 for Sartorius issues

[J F Johannes]

Possible power supply problem. These can and do go bad. Read Joe R post here:
Sartorius Entris 64 scale

Jim

 

[INTJ]

Those high end lab scales work on a hybrid pressure sensor and maybe that motor/dispenser over top of it is affecting the scale? I can turn my on and it will hold zero for days with or with out the cup on it but if you just put the slightest pressure on any corner of the scale it will float away from zero.

I have the Autothrow as well, and mine only drifts .005 a .010 grains after several rounds.

It seems possible that he might have a bad card or connection in his scale. That could allow it to work properly as long as nothing is connected to the port?

 

[BenPerfected]

For about $21 this pad on Amazon totally stopped all my powder issues on my Sartorius Scale. (2nd time post on the same issue)
Ben

• Anti-Static Mat ESD Safe for Electronic Includes ESD Wristband and Grounding Wire, HPFIX Silicone Soldering Repair Mat 932°F Heat Resistant for iPhone iPad iMac, Laptop, Computer, 15.9” x 12” Grey

 

[INTJ]

For about $21 this pad on Amazon totally stopped all my powder issues on my Sartorius Scale. (2nd time post on the same issue)
Ben

• Anti-Static Mat ESD Safe for Electronic Includes ESD Wristband and Grounding Wire, HPFIX Silicone Soldering Repair Mat 932°F Heat Resistant for iPhone iPad iMac, Laptop, Computer, 15.9” x 12” Grey

Exactly what issues were you having?

 

[BenPerfected]

Constantly tapping the aluminum powder measure on the scale to get it to half-ass repeat. Take a $21 chance on the pad, no risk if you buy it from Amazon. Please post me your results.
Follow up, also bought the same scale pad as a gift for a fellow shooter, he uses a different scale and also gets the same results.
Thanks,
Ben

 

[paulT]

well I purchased the V3 auto system and I can not get it to hold zero for my Entris scales. I can zero the glass cup out and remove it put it back on and scale never zeros back out. Re zero and same issues.
I never had issues with these scales until now. All those setting changes has really made the scale drift or its the electronics involved. Somethings just not right.
So I’m reaching out to you guys who has this system and what we’re your issues and how we’re they corrected? I’ve got matches coming up and I got to be able to trust these scales for my powder charges.

Did you connect the v3 auto trickler to the high sartorius entris cover or the a&d scales cover.

 

[zipollini]

I’ve decided to just return it and stay with my Prometheus. I couldn’t seem to get the problem resolved and after setting the scale back to my original settings it’s back holding zero with no drifting.

Why would you want an autotlrow system when you have a Prometheus ???