SOLD Unturned 221fb brass

[232]

I have had several inquiries for 221 fireball brass. This is formed from new unfired never primed or crimped Lake City 18 nato brass. I do not want to change settings on my autodod as it is dialed in for 20vartarg brass. Thus the necks will more than likely need turned by YOU to have safe neck clearance in your chamber. In their current state, seating a bullet will yield a loaded neck diameter of .2545 to .255".
This brass can also be necked down by you to 20 vt or 17 fireball if you choose to do so.
It is currently not annealed for those wanting to neck it down. If you are wanting to neck turn it as is, I will anneal it for you at no extra cost. From experience it does not spring back after expanding as much when annealed. Makes it not as tight, and turns easier on the turning mandrel.

85 cents apiece plus shipping. 350pcs available.
PM me if any questions.
Thank you.

 

[gasph]

I purchased some of the 20 VT brass and am very pleased with the quality and consistency of it. The workmanship is first class. Great seller to deal with also. Try it, you will not regret it.

 

[232]

Thank you gasph.
This brass has the same quality, consistency, and attention to detail in forming as my 20vt brass.

 

[.375RUM]

I have had several inquiries for 221 fireball brass. This is formed from new unfired never primed or crimped Lake City 18 nato brass. I do not want to change settings on my autodod as it is dialed in for 20vartarg brass. Thus the necks will more than likely need turned by YOU to have safe neck clearance in your chamber. In their current state, seating a bullet will yield a loaded neck diameter of .2545 to .255".
This brass can also be necked down by you to 20 vt or 17 fireball if you choose to do so.
It is currently not annealed for those wanting to neck it down. If you are wanting to neck turn it as is, I will anneal it for you at no extra cost. From experience it does not spring back after expanding as much when annealed. Makes it not as tight, and turns easier on the turning mandrel.

85 cents apiece plus shipping. 350pcs available.
PM me if any questions.
Thank you.
View attachment 1517308

232, i am interested in 100 pieces. My intention is to use 50 for my grandkids 221fb. The other 50 I will neck down to use in my 20VT. Could you anneal those for me please. Please send me the total $ and the address to send funds. Thanks