I have a question about extending the throat of a commercially cut chamber. Can someone with medium mechanical skill extend the throat with one of PTG's Hand Uni-Throaters, or is the path to disaster. Their explanation seems fairly easy to understand and the procedure seems simple enough. I’m asking for experienced information before I mess up. Thank you, Jim
Uni-Throaters
- Thread starter teele1
- Start date
The uni-throater comes with the chamber sleeve and adjustable lock nuts to control the depth of cut. You will need the bushings for the caliber to fit the bore. It comes with an extension handle so all you need to do is remove the barreled action from the stock, and you work right through the action.
Go slow, it doesn't take much to cut the throat. Use a dummy round, no firing pin or ejector.
Go slow, it doesn't take much to cut the throat. Use a dummy round, no firing pin or ejector.
Upgrades & Donations
This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.