Trimming 6bra with Lyman case trim xpress

[Freezebomb]

I was on the phone with Lyman today about another product but I asked if the number 13 bushing/pilot/whatever was the correct one for 6bra. They put me on hold to ask the techs and came back that the 6bra will not work with that trimmer at all with any bushing they had. Scratching my head on this one since the dasher and br all work off the same bushing.

Posting here to make sure I’m not nuts and this should work. Can’t test since my rifle is still at the smith being built and all my brass is new. Here is a screenshot of their bushing chart.

 

[big john 5394]

If it can do a 6 dasher it will do a 6 bra same shoulder angle 40 degree .i just trimmed 200 6bra brass with in .001 works great, trim the brass fired 2 times right out of the gun not sized.

 

[Freezebomb]

If it can do a 6 dasher it will do a 6 bra same shoulder angle 40 degree .i just trimmed 200 6bra brass with in .001 works great, trim the brass fired 2 times right out of the gun not sized.

Thanks John. That was my thought as well. Weird they said it wouldn’t work at all with any.

 

[NorCalMikie]

Funny that the folks "using" the gear know more about it than the folks making it.

 

[Danley]

My guess is, they have no idea what a BRA is and their "safe" answer was NO.