Trigger spring

[david12601]

Just traded for a bench rifle it has a jewel trigger I know they are out of business but is there someplace to buy a "C" spring......the previous owner had the trigger apart when I got the rifle......i cleaned and it is ready to go I just need a spring.....thanks

 

[Leeman]

There was a thread about the same thing a week or so ago. I think if you search the forums for jewel trigger springs it may be shown. One of the posters had the specification of spring length, diameter and coil gauge sorted, could have been an off the shelf item from Mcmaster Carr.

Think I found the thread.

Jewell trigger springs

Can anyone point me in the right direction on getting some trigger springs (small trigger return spring)for a Jewell benchrest trigger... Thanks!

forum.accurateshooter.com

 

[JMayo]

Look at the threads at the bottom of this one !
Jewel trigger spring

McMaster-Carr

McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.

www.mcmaster.com

 

[47WillysGuy]

I took these measurements from my spares. It close to what you need. Source. Could be Master Carr to test your gunsymthe abilities. Good luck!

Jewell Spring Specs:
Spring - Spr Dia -OD - ID - Length - Coils
A ---- 0.023 -- 0.087 -- 0.041-- 0.127 -- 4-5

B ---- None

C ---- 0.011 -- 0.090 -- 0.059 -- 0.125 -- 4-5

These are rough measurements, but should get you close to buying something.

 

[david12601]

Thanks for all the good info........shooters helping shooters.......makes.......a great forum....you guys are awesome