Tikka recoil lug bedding

[JEFFPPC]

I found this to be the case also with bullets about 85 grains and lighter. IMR 4350 is not terrible with these bullets but didn't produce the optimum performance I was seeking. Varget and IMR 4064 performed better with these lighter bullet weights. Even IMR 4895 performed better especially with 70 grain Nosler BT's.

However, at the 100-grain bullet level, IMR 4350 did perform on par if not better than the aforementioned powders depending on the brand of bullet chosen.

I'm with you on the4074 and Varget. 100 gr I have done well with 4831 but requires magnum primers for best accuracy, most often, not always.