The Urbanrifleman 6bra Prefit

[urbanrifleman]

I figure it might be of interest. Here is a video of my new 6bra barrel I will have for sale in the coming months. The chamber is a 272 neck and will be offered in 50 freebore and 104 freebore. The prototype shown here is the 50 freebore. The barrel is 1-8 twist.

The barrel was broken using Tubb final finish bullets.

All loads were with AR COMP. Keep in mind this is a break in. No load workup.

I will also be offering the benchrest stock shown in the video with aluminum bedding block. This is a stock 40x not bedded.

 

[urbanrifleman]

Here is the barrel before break in. Straight out of the box.

 

[urbanrifleman]

Here it is after break in

 

[afret]

That barrel definitely shoots. Is the stock you're going to sell a Keystone Revolution?

 

[Ranger188]

Bradley, if you start making BRA brass, you'd be da man.

 

[urbanrifleman]

That barrel definitely shoots. Is the stock you're going to sell a Keystone Revolution?

Yes.

 

[Link]

Break in, tune up and post some group pictures ;}

Don

 

[afret]

When are going to start selling the stocks and what would be your price? Also will you sell the action screws for the stock?

 

[urbanrifleman]

When are going to start selling the stocks and what would be your price? Also will you sell the action screws for the stock?

I need to call Bat and get their trigger guard and screw. Thanks for asking!!

I'm going to be selling the gloss aluminum bedding block benchest for around $450.

 

[urbanrifleman]

Break in, tune up and post some group pictures ;}

Don

I'm going to be posting some more, but I thought the video groups were pretty good

 

[afret]

I need to call Bat and get their trigger guard and screw. Thanks for asking!!

I'm going to be selling the gloss aluminum bedding block benchest for around $450.

That's good. So you'll be selling the whole ready to go kit. And does it require some kind of wood screw for the front side of the trigger guard besides the 2 action screws?

 

[urbanrifleman]

That's good. So you'll be selling the whole ready to go kit. And does it require some kind of wood screw for the front side of the trigger guard besides the 2 action screws?

I will look into getting the single screw. There is no front screw.

Yes that is kind of the idea. Everything but the action.

 

[urbanrifleman]

Same prototype 6BRA barrel with freebore set to 104. AR Comp node. Elisio chassis with a bone stock Rem 700 action.

Two groups on left are with the Tubb bipod and squeeze bag and the two on the right are with pickle forks installed on benchrest.

 

[urbanrifleman]

 

[cmillard]

What blanks are you using?

 

[urbanrifleman]

What blanks are you using?

Wilson.

 

[cmillard]

Ok, thanks

 

[slobhunter2]

When are these going to ship ?

 

[urbanrifleman]

When are these going to ship ?

They shipped to me. Just waiting for them to arrive.