The Harvey Deprimer hand held depriming tool review

[Mr.Spradlin]

I have been looking for a hand held depriming tool on line with no luck until a few weeks ago when I came across this web site http://www.harveydeprimer.com .
Not knowing if the depriming rod was small enough to use with the small flash hole the 220 Lapua brass has I sent them an email asking them what the pin size was. I received a reply back from Roger Harvey the very next day with the size of 0.060 and offered to send me a depriming rod to check and make sure if it was small enough to work.
He sent me one and it fit perfectly. I sent Roger an email with the results and ordered one.
The tool came in the other day and I was able to play around with it this morning and found it to work very well. It is well built, fit my hands nicely and takes very little effort to deprime a case.
But what really impressed me about this product was the customer service. Mr. Harvey was very helpful and when I ordered the complete tool I told him to keep the depriming rod since he sent me one already. When the tool arrived it still had the depriming rod in it.
If anyone has been looking for a hand held depriming tool I suggest you take a look at this tool.

 

[mr45man]

Depriming pin diameter: .07"
From there site ;D
John H

 

[skiutah02]

I've had this for about two years and it is fantastic. I've deprimed about 15,000 assorted types of brass without any difficulty. I give it an A++. Great for down time during matches. Drew

 

[Mr.Spradlin]

Depriming pin diameter: .07"
From there site ;D
John H

He has two sizes. I looked at the one that came with the tool and the one he mailed to me to test and one is 0.060 the other is 0.070. So guess has a large and small decapping rod now.