Stolle Kodiak with floor plate fp spring

[JMayo]

It's a stolle Kodiak with a floor plate (ibs hunter gun) a short action ?
I'm wanting to replace the fp spring

 

[Dusty Stevens]

Id get one from kelblys

 

[joshb]

Ditto, but to actually answer your question: Yes.

 

[AlNyhus]

I ditch the spring and use a piece of foam under the follower to hold it in place. A Davidson style follower on top is even better. -Al

 

[rjtfroggy]

I ditch the spring and use a piece of foam under the follower to hold it in place. A Davidson style follower on top is even better. -Al

Al do you know of anybody selling these followers?
I can't seem to find them.

 

[AlNyhus]

Al do you know of anybody selling these followers?
I can't seem to find them.

Yeah...getting hard to source the flat bottomed Davidson/Sinclair ones. Thankfully, I've got extras.

Another very good one is the PT&G. The top is identical to the Davidson/Sinclair but the bottom is rounded to match the profile of a 700 for those that want to glue it in and do a full length receiver bedding job...like you'd do with a single shot 40X. They also work great with a piece of foam under them into the mag well.

Short Action (SA) Bench Rest Single Shot Follower for ADL & BDL Inlets - Pacific Tool and Gauge

Short Action (SA) Benchrest Single Shot Follower for ADL & BDL Inlets at Pacific Tool and Gauge

pacifictoolandgauge.com

Hope this helps. -Al

 

[JMayo]

Thanks, yes short action
FOR FIRING PIN spring ..
Thanks guys.
I assume the plate had to be made, idk.
The stock bottom is filled in & painted. the plate is on foam so it'll press down a little per ibs rules.

 

[WSnyder]

Hankins Muzzleloaders sells one for Rem 700 SA ML conversions. It’s contoured to match the receiver like the PTG.

Remington 700 Short Action Single Shot Follower - Hanks Precision Gun Parts

Here is a single shot follower designed for the Remington 700 short action. This part will drop in the action opening for use when shooting single shot rounds or can be used to fill the opening when using a re-peater action to build a muzzle loader. The follower can be epoxied in place or use...

hanksprecisiongunparts.com

 

[JMayo]

Brownells - Serious about firearms

Stock up on the magazines you need!

www.brownells.com

This looks allot like what's in mine.
Seems a little deeper though, idk

 

[AlNyhus]

Thanks, yes short action
FOR FIRING PIN spring ....

The firing pin spring is the same as a Panda.

 

[Dusty Stevens]

Yes get the firing pin spring from kelblys. Cheaper than anywhere else

 

[AlNyhus]

Yes get the firing pin spring from kelblys. Cheaper than anywhere else

And more consistent.

 

[JMayo]

Wow ! Kelby & Bat do not mess around.
FP springs came today !

I've got one more match this season & I've managed to do pretty good, more than i ever expected. I'm not going to change anything until after season....
I'd surely screw things up !

 

[AlNyhus]

Kelbly's customer service has always been top shelf, in my experiences.

When changing the spring, if you have the type of tool that the entire assy screws into....make sure the pin tip doesn't bottom out in the tool and slightly mushroom the tip. After having this happen, I made a spacer for mine to prevent it.

Good shootin' -Al