Starting Loads 6mmBR Berger 90, 95, 105, and 108 gr. Please Share

[Bill Norris]

Received my Rem 700 6mmBR 1 - 8 Tw. 26 " Custom Build from Zack @ O D Custom Rifles today and have the Berger bullets listed in the title on hand. The component list of my rifle is listed below as well. Was wondering if maybe you guys would care to share your start load info for these. Thanks in advance.

CHAMBER - 6BR 271 Neck .120 Free Bore
BARREL - 26" Brux 1-8 tw - 11 Deg. Recessed Target Crown - H V Cont.
ACTION - Rem 700 S S Polished Side Bolt Release Added
LUG - PTG .2285 Tapered
BOLT - Spiral Flute Cust. Knob w/Lapua Insert - PTG Alum. Firing Pin Assembly
TRIGGER - Jewell B R / No Safety
STOCK - B R Sapele Wood 3" wide forearm by Jimmy Tate

 

[JFrank]

Sweet
Here’s one for 107 smk

 

[HTSmith]

Nice indeed. With your free bore, I'd focus on the 105 & 108's. I started out with Varget a hunnert years ago and have stuck with it, but there are others in that burning rate range that others swear by. With that throat you'll probably get past the 30 Gr mark, but I'd probably start at 29.0

 

[Ranger188]

Here's one for the 95g (Sierra matchking)
26 inch Hawkhill 8tw .273 neck
This is a warm load, so work your way up
31.0-32.0 (31.8-32.0)IMR4166 about .020 off CCI450's @3040fps
At that speed will keep pace (same drift and less drop) with the 105's at 600yds.