Sinclair Competition Rest travel case?

[wang243]

Looking for a case to protect a Sinclair competition rest while transporting to and from the range. Is there a case out there that it will fit in without taking it apart or do most guys make their own.

Looking for suggestions those using this rest.

Thanks

 

[rardoin]

Looking for a case to protect a Sinclair competition rest while transporting to and from the range. Is there a case out there that it will fit in without taking it apart or do most guys make their own.

Looking for suggestions those using this rest.

Thanks

Look for my post on the Neo case thread as I will be posting my Pelican case wheeled solution for the Neo. It would likely hold the Sinclair without breaking it down. I can put my Sinclair against it to check. This will not happen until later this pm.

 

[wang243]

Look for my post on the Neo case thread as I will be posting my Pelican case wheeled solution for the Neo. It would likely hold the Sinclair without breaking it down. I can put my Sinclair against it to check. This will not happen until later this pm.

rardoin,
I believe the Neo is much larger size wise then the Sinclair. I have a Pelican 1550 and it has swimming room in it.
I am looking for someone that uses the Sinclair and has found the correct size travel case for it.

 

[rardoin]

Wang...I posted pics of the Sinclair sitting atop the open case in the Seb case thread.

 

[wang243]

Wang...I posted pics of the Sinclair sitting atop the open case in the Seb case thread.

Would you mind listing the page as there a many many pages of Seb info.
Thanks

 

[hrlincoln]

I have a Plano Gun Guard case that I use to transport my Sinclair rest and it works well. I do not have the Competition rest though...I have the Benchrest Heavy Varmint rest w/windage top. Dimensions should be pretty similar. I have just enough room for the rear bag too.

http://www.planomolding.com/tactica...weather-tactical-xl-pistol-and-accessory-case

 

[rardoin]

Would you mind listing the page as there a many many pages of Seb info.
Thanks

http://forum.accurateshooter.com/threads/seb-neo-box.3923286/

 

[IdahoSharpshooter]

I carry my Competition Rest in a Surveyor's Transit Case. A new laser leveler can cost close to a new Corvette. The case has padding about nine inches deep. Unfortunately, the yellow poly case has no name on it. A label on the side just says large ACC. Optics Case.
barcode reads 89270 17 140
dimensions are 20Long x 16 Wide x10 Deep.

hope this helps.

 

[brxbrad]

There's one thing I don't like to do and that's make trip after trip back and forth to my car to compete or practice. I wanted something that was big enough to hold the "little" stuff and was small enough to load and unload in and from my car.
This holds my:
Shooting Mat
Kowa Spotting Scope
Spotting Scope Stand
Seb Neo Rest
Protecktor DR.
It is water proof, has wheels, retractable handle, and has a drop in box for tape, hand tools, etc.
$60 bucks
Weight full is approx 50 lbs. I'm 64 and can handle it relatively easy
http://www.homedepot.com/p/Husky-35-in-Mobile-Job-Box-222167/205053257

The only things left to carry are my gun and ammo....

 

[Big Mc]

Looking for a case to protect a Sinclair competition rest while transporting to and from the range. Is there a case out there that it will fit in without taking it apart or do most guys make their own.

Looking for suggestions those using this rest.

Thanks

You might want to look at the SKB boxes.They make bullet prof gun cases an utilty boxes. Just my two cents.. Tommy Mc..

 

[madmixerman]

I bought mine on eBay , it was a Condition1. Every bit as strong as a Pelican but way cheaper to buy.