shoulder bump from daily bulletin

[treeman]

I saw the post on the daily bulletin about shoulder bumping . i had the same problem so i took a few thousandths off the shell holder problem solved!
treeman

 

[queen_stick]

I had to do that with my Dasher... worked great!

 

[camac]

I have seen this several times and have modified a few guys dies here to fix. It can be both a die or shell holder fault (generallyt dies though). Firstly I try the die with my "standardised" shell holder then if that is still not OK I try and take the bottom few though off the sizing die (simple job in lathe - even with hardened steel and grinder/emery paper). rather than mess with a shell holder that may be correct.....