longrangehunterII
Silver $$ Contributor
I bought this used from MHSA in October of 2018, and it was The most accurate rifle I’ve ever bought! I was told it had only 800-900 rounds through it.
I used it for the next 4 years and had SAC install another 27” Hawk Hill MTU 1:8” .264 cal barrel in February of 2023 I had bought two years prior. Along with a 27” .308 Krieger MTU in 1:9” twist for shooting long distance precision using the Berger 185 Juggernaut bullet. (That barrel is sold separately from the cost of the rifle being sold as well as the NF ATACR Scope and MDT mount.)
The 260 was chambered at SAC with a Match Tac reamer designed for Lapua brass and the BT right at the neck/shoulder junction with Sierra 142 CN SMK’s. Currently loaded ammo COAL is 2.8300”. I typically get 2,800-2,825 f/s with this barrel using various powders designed for this case. H4350, H4831sc, VV N160, etc, and they all provide exceptional accuracy no matter how you assemble the ammunition.
The 260 will have 711 rounds down the barrel when it sells. I say that because I have 28 remaining rounds left and since hand loads can’t be sold they will be tested in the next few weeks to show how well it shoots. (See test targets in the photos, those are fairly current). Yes the groups shrink when a APA G3 Little Bastard is installed. Barrel is threaded 5/8x24.
The Krieger 308 Winchester barrel has only 297 rounds down the barrel! Honestly it has the same thread pitch as a few of my other actions, so it’s not important if it sells or not. ($800.00)
SAC 260 rifle without the NF Scope and MDT Scope mount and bipod is $3850.00 which will include 700 pieces/ or close to it, of Lapua 260 Remington brass used in this gun. (All of it will be SS media cleaned, but not sized.)
NF ATACR 5-25x56 F1 Mrad, Digi, PTL, ZeroStop, Mil-XT reticle with MDT Mount, or a SPUHR SP-4001 mount if you prefer. $3,000.00.
Krieger 308 Winchester barrel $800.00.
I competed in PRS with this rifle as well as another one identical too it, but is a 6GT/ SBR 308.
There’s plenty of shooters out there twice as good as me and as such, would be in the top tier competitively with this rifle, but I’m just not that good!
I can’t competitively compete anymore, so I’m selling off this rifle to someone that can actually bring it the justice it deserves.
!
I used it for the next 4 years and had SAC install another 27” Hawk Hill MTU 1:8” .264 cal barrel in February of 2023 I had bought two years prior. Along with a 27” .308 Krieger MTU in 1:9” twist for shooting long distance precision using the Berger 185 Juggernaut bullet. (That barrel is sold separately from the cost of the rifle being sold as well as the NF ATACR Scope and MDT mount.)
The 260 was chambered at SAC with a Match Tac reamer designed for Lapua brass and the BT right at the neck/shoulder junction with Sierra 142 CN SMK’s. Currently loaded ammo COAL is 2.8300”. I typically get 2,800-2,825 f/s with this barrel using various powders designed for this case. H4350, H4831sc, VV N160, etc, and they all provide exceptional accuracy no matter how you assemble the ammunition.
The 260 will have 711 rounds down the barrel when it sells. I say that because I have 28 remaining rounds left and since hand loads can’t be sold they will be tested in the next few weeks to show how well it shoots. (See test targets in the photos, those are fairly current). Yes the groups shrink when a APA G3 Little Bastard is installed. Barrel is threaded 5/8x24.
The Krieger 308 Winchester barrel has only 297 rounds down the barrel! Honestly it has the same thread pitch as a few of my other actions, so it’s not important if it sells or not. ($800.00)
SAC 260 rifle without the NF Scope and MDT Scope mount and bipod is $3850.00 which will include 700 pieces/ or close to it, of Lapua 260 Remington brass used in this gun. (All of it will be SS media cleaned, but not sized.)
NF ATACR 5-25x56 F1 Mrad, Digi, PTL, ZeroStop, Mil-XT reticle with MDT Mount, or a SPUHR SP-4001 mount if you prefer. $3,000.00.
Krieger 308 Winchester barrel $800.00.
I competed in PRS with this rifle as well as another one identical too it, but is a 6GT/ SBR 308.
There’s plenty of shooters out there twice as good as me and as such, would be in the top tier competitively with this rifle, but I’m just not that good!
I can’t competitively compete anymore, so I’m selling off this rifle to someone that can actually bring it the justice it deserves.
!
Last edited:
