• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Shipping a Farley

I shipped one once. I started with a corrugated cardboard box that a metal 3-drawer tool box came in. Then I basically built a corrugated cardboard box around the rest that would fit into the box. I used reinforced packing tape to hold things together while I built it up. It made the trip fine.
 
I built a wooden box to ship mine. Sides, bottom and top were all screwed together. The rest was bolted to the bottom with through bolts, fender washers and locking nuts. Two short lengths of 2X4 screwed to the bottom for easy handling and to keep the bolt heads holding the rest off the floor. All the accessories (handle, leg screws, etc) went in a cardboard box and the whole thing was packed tightly with shipping materials. It went out FedEx and returned via UPS....no issues.

A Sinclair Competition rest that just got here was in a heavy cardboard box from Home Depot with a wooden bottom inside. Everything was disassembled and individually wrapped in foam packing. Strapping tape around the box. It came UPS and was very reasonable to ship.

Hope this helps. -Al

E1tRCipl.jpg

7we7uTIl.jpg

6xFpWz9l.jpg
 
Last edited:

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
165,833
Messages
2,204,150
Members
79,148
Latest member
tsteinmetz
Back
Top