nastynatesfish
A day which we will live in infamy
Bare with me I'm trying to get links and pics to the original story and I'm on my iPhone
well it started with me loading ammo for a range trip. i got back and decided to load up 5 rounds of ammo to try different. got home loaded those and the next morning went to go shoot them. BOOOMMMM. when i recovered from the shot i looked at my gun and the whole reciever was smoking. i tried to open the bold and it was stuck. i came home and tried again, nothing. i decided to let it sit with some lube into it, took it out of the stock and sprayed it down. set it in my vise and soaked it. the next morning i started on it trying to open the bolt. using my nylon mallet, tap, tap tap. it moved a little, ok tapped it closed. tap tap tap snap. the bolt handle hit the floor. i was fairly sick to my stomach then, got the barrel nut wrench out and tryied to break the nut loose, nothing. finally got the barrel to turn some. soaked it with moly grease. tarted working it back and forth, thats when i saw my .250 recoil lug moving with the barrel. went to Circle K and got a 6 pack. got home and and started cranking on it, i knew it was done. got the barrel off and stared at the spent case stuck in the bolt head, used my mallet and banged it out, thats when it turned into a game. finished my 6 pack and went to bed. the next morning my brother in law called and said he loaded some rounds for his grandpas 44mag. thans when i told him to come get his crap out of my house and buy his own. told him what happened. like i said i think the 65 grains of reloader 2400 was to hot for the 154 interloc i was trying to push out of it, lol. sold my FAL and bought the sps and started over. that was 2 years ago, and yes i learned from my mistake. i now lock my powders up and keep my loading table to myself. never crossed my mind to check the powder dump to see if it had been changed. i do now everytime i open a jug of powder.
well it started with me loading ammo for a range trip. i got back and decided to load up 5 rounds of ammo to try different. got home loaded those and the next morning went to go shoot them. BOOOMMMM. when i recovered from the shot i looked at my gun and the whole reciever was smoking. i tried to open the bold and it was stuck. i came home and tried again, nothing. i decided to let it sit with some lube into it, took it out of the stock and sprayed it down. set it in my vise and soaked it. the next morning i started on it trying to open the bolt. using my nylon mallet, tap, tap tap. it moved a little, ok tapped it closed. tap tap tap snap. the bolt handle hit the floor. i was fairly sick to my stomach then, got the barrel nut wrench out and tryied to break the nut loose, nothing. finally got the barrel to turn some. soaked it with moly grease. tarted working it back and forth, thats when i saw my .250 recoil lug moving with the barrel. went to Circle K and got a 6 pack. got home and and started cranking on it, i knew it was done. got the barrel off and stared at the spent case stuck in the bolt head, used my mallet and banged it out, thats when it turned into a game. finished my 6 pack and went to bed. the next morning my brother in law called and said he loaded some rounds for his grandpas 44mag. thans when i told him to come get his crap out of my house and buy his own. told him what happened. like i said i think the 65 grains of reloader 2400 was to hot for the 154 interloc i was trying to push out of it, lol. sold my FAL and bought the sps and started over. that was 2 years ago, and yes i learned from my mistake. i now lock my powders up and keep my loading table to myself. never crossed my mind to check the powder dump to see if it had been changed. i do now everytime i open a jug of powder.