• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

seating depths ??

243 .0015 neck tension 115 berger.tried .01,. .015 .02 .025 .03 . after .02 bullet,measuring rifling marks,did not seat any further,i guess bullet is backing into case.i see some deeper seating by members here. are they using more neck tension?i did this test to feel seating at different depths.and look at rifling marks.just had to ask !!
 
Doc
I'm not sure what your question is? Your numbers seem a little strange and there are no decimal points. What units of measure are you using?
Regards JCS
 
Did you mean 0.0015" neck tension and 0.010", 0.015", 0.020" bullet jam into lands?
If so, then, yes your neck tension will be too light to jam more than .020" into the lands and you will be "soft seating" the bullets, which is fairly common with the 115s.

If your measurements were .001", .002" etc, you are not changing seating depth enough.
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
166,807
Messages
2,223,668
Members
79,899
Latest member
Orville. Johnson
Back
Top