Scope ring recommendation for t3 tikka

[cjmac]

So I have just got my tikka t3 back from getting a new barrel on it . Its a m24 contour at 24in . I have a 4-20x50 zero tech scope . Looking at this style ring and base . Question is would I need a medium or high ring ? Not sure with this style ring . Warn offers the tikka clamp and recoil pin factory style .

 

[Daveofiowa]

Ring height is what works best for you and your optic.

Can you mock up the medium and high setups with shims and tape to see which is best for you? Another option would be 3d printed rings at various heights to decide what works best for you before ordering rings.

 

[Lee Whitsel]

So I have just got my tikka t3 back from getting a new barrel on it . Its a m24 contour at 24in . I have a 4-20x50 zero tech scope . Looking at this style ring and base . Question is would I need a medium or high ring ? Not sure with this style ring . Warn offers the tikka clamp and recoil pin factory style .

Take a look at DNZ Game Reapers by dead Nutz's for the same money Remington Factory Rep told me years ago when they came out with this all 1 piece mount they switched their lab test guns all over t this mount as they where 1 not 2 pieces and where very happy with them. I switched my guns over and very happy I did. They make a Tika mount.

 

[cjmac]

Take a look at DNZ Game Reapers by dead Nutz's for the same money Remington Factory Rep told me years ago when they came out with this all 1 piece mount they switched their lab test guns all over t this mount as they where 1 not 2 pieces and where very happy with them. I switched my guns over and very happy I did. They make a Tika mount.

I forgot about them ill have to look. With a 50mm objective and m24 contour im thinking medium should be ok.. probably be reqlly close tho

 

[Ackman]

Use Burris Signature rings, I don't put a scope into anything else.

 

[cjmac]

Use Burris Signature rings, I don't put a scope into anything else.

Thay offer a one piece? Haven't seen much of there stuff

 

[Lee Whitsel]

Use Burris Signature rings, I don't put a scope into anything else.

Also a great choice if you don't kind 2 separate base being used. I can't get into Warne myself. Far better mounts out there.

 

[K22]

I have Talley Mounts on all my Tikka's. Completely satisfied with them.

Talley's customer service can aid you in selecting the correct height based on the scope you select to install.

 

[Ackman]

Thay offer a one piece? Haven't seen much of there stuff

I doubt that Burris offers a one piece base, but really don't know. But Picatinny rails are available. My favorites are Hanks Precision on Remingtons, but also have EGW and Leupold and one other. They're avalable.

 

[cjmac]

Also a great choice if you don't kind 2 separate base being used. I can't get into Warne myself. Far better mounts out there.

Just curious is warning not a good quality?

 

[cjmac]

Im reqlly between the warn factory style and the leupold backcountry ones

 

[dthomas]

I also like the DNZ one piece mounts

 

[Woollybugger]

I’m put Picatinny rails on everything. Some 20moa and some 0moa. Recently tried the American Rifle company M-Brace rings. They work really well and only have one screw to clamp to the rail on each ring and another to clamp to the scope. Their method of checking height works well too. Stack penney’s on the rail and hold the scope on the stack to find the ring height.

M-BRACE SCOPE RINGS

www.americanrifle.com

scroll down to see the height measurement method.

 

[cjmac]

I’m put Picatinny rails on everything. Some 20moa and some 0moa. Recently tried the American Rifle company M-Brace rings. They work really well and only have one screw to clamp to the rail on each ring and another to clamp to the scope. Their method of checking height works well too. Stack penney’s on the rail and hold the scope on the stack to find the ring height.

M-BRACE SCOPE RINGS

www.americanrifle.com

scroll down to see the height measurement method.

Interesting

 

[nwmnbowhunter]

Unknown munitions makes some good tikka rings as well

 

[Infrequent Shooter]

Take a look at DNZ Game Reapers by dead Nutz's for the same money Remington Factory Rep told me years ago when they came out with this all 1 piece mount they switched their lab test guns all over t this mount as they where 1 not 2 pieces and where very happy with them. I switched my guns over and very happy I did. They make a Tika mount.

I studied a lot of the tikka mounts etc and DNZ looked like a good one. AND I don't envy your position. I spent hours on ebay. good luck. I ended up with Audere rail

 

[SubVet]

Spuhr one piece, specifically for Tikka mount directly on receiver. No need for pic rail.

 

[ELR LVR]

Im reqlly between the warn factory style and the leupold backcountry ones

Warne is good quality
I have a set of 30mm , for $100 or under they are a good option
They even make Steel rings and nice lightweight Rings with Ti parts
However, if you need an option that brings the rings into the $150 category
for similar money, I'd use Nightforce rings
I notice my Nightforce Xtreme rings are more refined in the finish/smooth as silk threads etc.
I really like the Nightforce Ti cross bolt, plus the body they Tell us they are made from 7075
which is a much stronger grade of Alum than 6061.
If a Mfgr. does not list what material they use, it is likely 6061, and often the screw holes can strip out because 6061 is so soft.
I will not buy a 6061 Alum chassis, and refuse to pay the same as one made from 7075, its a cheap out move
just to save a few dollars and capitolize on peoples ignorance
Same with rings