Savage "nutless" tenon length

[Butch Bradshaw]

Anyone know what the approximate tenon length would be on a 110 Savage if threaded to the shoulder with no nut?

 

[jkohler]

A depth micrometer would tell you all you need.

 

[Stan Taylor]

I would say about .830 long

 

[Riesel]

Would that be measure from the action face to the nose of an inserted bolt fully closed and pulled back to eliminate all slack and then subtract 10/thousands off that reading?
Using a depth micrometer. And that won't be "approximate"
Editing: I should have also stated that you must add thickness of recoil lug to above measurement for total tenon length. I apologize for that omission.

 

[Butch Bradshaw]

A depth micrometer would tell you all you need.

I agree, but don't have the action here in front of me.

 

[Butch Bradshaw]

I would say about .830 long

Thank you Sir!

 

[Stan Taylor]

Thank you Sir!

I will check my notebook in the morning but I think I'm correct on that an will post it tommorow for you Butch.

 

[Stan Taylor]

Here you go Butch

 

[Butch Bradshaw]

Here you go ButchView attachment 1161312

Thanks You Stan!

 

[dskogman]

Here you go ButchView attachment 1161312

How long has it been since I’ve seen a typewritten page ?
My grandkids have no clue what a typewriter even is.