• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Savage mpdel 12 308 load work up

Just got a used savage 308 model 12, I am looking for some loads for this rifle. Does anyone have a good load to sart with that works well. Also a good starting seating depth? I have varget on hand. Thanks
 
If you have Varget, one place to start would be with Sierra 155 Palma bullets. Somewhere around 45 gr should get you some results.

Bob
 
Assuming that 'model 12' here means '12 F/TR'...

Berger 155.5 BT 'Fullbore'
Lapua or Winchester brass - Winchester is cheaper, but will require more prep/sorting.
Varget or Viht N150 46.5-46.8gn in Lapua cases, 47.5-48+ in Winchester cases
Rem 9-1/2 or 210M primer

Seat bullets between 0.015 and 0.050 off lands (I usually go with about 0.045, just because it worked when I first tested these bullets and I've stuck with it ever since). Velocity should be somewhere between 2950-3000fps, maybe more if you're lucky.

Back off a grain or more from the above and double & triple check all your numbers when starting out.
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
169,984
Messages
2,285,163
Members
82,448
Latest member
gabernathy
Back
Top