Savage Ejector Spring

[centershot]

There are some very old postings on this. Where can I get a Savage Ejector Spring? Not the kind that fly away when you try to install them. Midway, Brownells are on back order.

Since they are available, do Remington ejector springs fit?

 

[dsculley]

You can get them from Sharp Shooter Supply. They offer an improved extractor kit that includes the ejector and spring as well. It does work well, I have one on my bolt and a spare in my tool box. The kit is $20.00.

http://www.sharpshootersupply.com/

 

[Ggmac]

Extractor springs for savage are the ' flying ' ones generally . Ejector springs have been known to fly but generally roll .

 

[JLT]

Extractor springs for savage are the ' flying ' ones generally . Ejector springs have been known to fly but generally roll .

Yes indeed, and the extractor springs do a fine job of propelling that little ball bearing into one's forehead and off into the great beyond.

 

[Blackthorn]

Yes indeed, and the extractor springs do a fine job of propelling that little ball bearing into one's forehead and off into the great beyond.

That is the reason I keep a bag of 9/64 bearings in the tool box.....

Gun Parts Inc has the spring the OP is in search of.....
https://www.gunpartscorp.com/Products/283710F.htm

 

[Richard Jones]

There are some very old postings on this. Where can I get a Savage Ejector Spring? Not the kind that fly away when you try to install them. Midway, Brownells are on back order.

Since they are available, do Remington ejector springs fit?

PM me, I'll drop one in the mail to you.

 

[centershot]

PM coming Richard. Thank You!

 

[spaniel]

Recently needed to replace a couple….had to order the kits to get them. Very annoying.

 

[Zero333]

I would order a couple along with a ejector, extractor, extractor spring and detent ball.

2 of each will cost you very little and you'll never have to worry about it.

Another one that loves to fly fast and far is the sear spring. Lost one and never found it. And it's not as small as the ejector spring.

 

[dsculley]

And when you work on the bolt head (extractor or ejector), do so in a plastic bag. A good way to keep the springs and balls from getting lost.

 

[TheOtherZilla]

My son's hangs up once in a while. We just clean it out with some CRC and oil it.

 

[Texas10]

I ordered 3 or 4 each of the bolt head parts from Savage and keep in my kit, got tired of chasing parts around the shop. Had to sign a waiver but no big deal, and the cheapest prices around by far. The 9/64 steel balls are cheap too, work great. Google 'm.

Also bought 3 of the "improved extractor kits" from SSS but just about the time they arrived, decided to remove the ejectors from my bolt heads. No more cases laying on the magazine, or chasing them around the shooting bench. Open the bolt, remove the case and place back in the box, load another...shoot. Never have to lift my cheek off the stock. Works perfectly, 100% of the time.

 

[M-61]

From Texas10:
The 9/64 steel balls are cheap too, work great. Google 'm.

https://www.amazon.com/gp/product/B01AX6XNXQ/?tag=accuratescom-20

 

[teele1]

either the OP mis-spoke when he said EJECTOR spring or everyone else went off on EXTRACTOR
and YES there is a newer EJECTOR that won't kill your spring with a blown primer

 

[Richard Jones]

either the OP mis-spoke when he said EJECTOR spring or everyone else went off on EXTRACTOR
and YES there is a newer EJECTOR that won't kill your spring with a blown primer

I am guessing that he did mean EJECTOR spring, since he asked if a Remington would fit. I believe a Remington's extractor spring is a bit different...........

 

[Big Mc]

There are some very old postings on this. Where can I get a Savage Ejector Spring? Not the kind that fly away when you try to install them. Midway, Brownells are on back order.

Since they are available, do Remington ejector springs fit?

The ejector has NO ball.Just the spring and the steel shaft.

 

[centershot]

I am not talking about the extractor. Have not lost that yet!

 

[DirtySteve]

I am not talking about the extractor. Have not lost that yet!

Well hurry up and lose it because we are on a roll ..... lol.

 

[Big Mc]

The ejector has NO ball.Just the spring and the steel shaft.

Your post said EJECTOR spring..

 

[DogBuster]

never use the ejector.......extractor yes......

don't have to chase your brass in the dirt.....

ball bearings ? Ace Hardware.....cheapest I've found......