on the main board there was an inquiry about a sako factory ppc value,,,I asked if Lapua brass would work in one of those rifles,,,they never answered so I am asking the people who shoot them,,,is the chamber smaller at the .200 line than Lapua brass which would require some other brand/size of ctg. brass,,,I realize they may need to be trimmed to length but what about base line??? .....I would like to know what is required to shoot one of these rifle using modern day brass that is available on todays market,,,,,thank you ...Roger
sako ppc chamber question,,,,
- Thread starter expiper
- Start date
Murray Brook
Silver $$ Contributor
I have 2 Sako 6mm PPC USA rifles and I use Norma brass. I believe there would be no problem using Laupa brass as far as the 200 line is concerned, but you may have to turn the necks. Alpha brass has a .014 neck and to use this brass in the Sako chamber (.271) the neck needs to be turned for proper clearance. I'm sure you could get a definitive answer at the link below.
sakocollectors.com
Sako Collectors Club Discussion Forum
Sako Collectors Club is a discussion forum about Sako rifles, firearms and more. To join us just visit http://www.sakocollectors.com/forum
sakocollectors.com
Upgrades & Donations
This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.
Click Upgrade Membership Button ABOVE to get Gold or Silver Status.
You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.
To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.