• This Forum is for adults 18 years of age or over. By continuing to use this Forum you are confirming that you are 18 or older. No content shall be viewed by any person under 18 in California.

Sako 75 action wrench

I want to change the barrel on my Sako mod75 6PPC so am looking for a through action wrench is there such a thing to be bought or will I have to have one specially machined.
Being a 3 lug action dosent make it easy.
 
Since the Sako- 75 is a flat bottomed action I use a Mauser type wrench.
I'd like to have one made that would fit the bolt raceway so I wouldn't have to pull the action from the stock.

SDH
 
That is what i am after the wrech used for mausers remintons etc and most 2 lug actions is he same FLAT BAR THAT SLIDES UP THE RACEWAY. My L579 Sako i dont mind useing the flats at the front of the action as it is a machined action from a billet of steel were as the 75 mod stainless is a cast action and i likr to screww the barrel in tight.
 
Is the Action Wrench you got from Midway for your mod75 Sako a through the action type wrench or one that locks around the front of the action.
 

Upgrades & Donations

This Forum's expenses are primarily paid by member contributions. You can upgrade your Forum membership in seconds. Gold and Silver members get unlimited FREE classifieds for one year. Gold members can upload custom avatars.


Click Upgrade Membership Button ABOVE to get Gold or Silver Status.

You can also donate any amount, large or small, with the button below. Include your Forum Name in the PayPal Notes field.


To DONATE by CHECK, or make a recurring donation, CLICK HERE to learn how.

Forum statistics

Threads
165,789
Messages
2,203,432
Members
79,110
Latest member
miles813
Back
Top