SAC resizing dies

[clowdis]

Has anyone tried these sizing dies? Seem to be kind of expensive but are they worth the cost?

PRECISION RESIZING DIES | Brownells

The new Precision Resizing Dies are the culmination of years of shooting and reloading precision rifle cartridges. The design and execution of the Precision Resizing Dies are pure Short Action Customs innovation and demand for excellence Each Prec...

www.brownells.com

 

[JMayo]

Good God 300.00 not no but he'll no !

Harrell's is my go to. Ask for a smaller than the brass sent if that's the desire.

Wilson dies are good also.
imo

 

[Dusty Stevens]

Whatever the whidden click adj dies cost should be the top end of price

 

[Rset]

If they make you feel like you will shoot smaller, maybe they are worth the price.
Lots of them being sold, so someone must think so. Certainly not me.
But, then again, I also don't have a Zero Press, an AMP, an AMP Press, a Prometheus, etc.

 

[Alex Wheeler]

If Bullet Central makes a micron die in your chambering it will be the best you can find. If Harrell's makes a die in your chambering it will be the best value you can find.

 

[JayHHI6818]

Don’t forget seater die

“The” Seating Die

"The" Seating Die ensures precision seating for reliable bullet alignment, delivering optimal performance for your reloading needs every time.

shortactioncustoms.com

Look at Warner dies

WTC Custom Sizing Die - Custom Made to Fit Your Rifle's Chamber

Each Warner Tool Sizing Die is made custom to match your rifle's exact chamber , CNC manufactured to perfectly fit your 1X fired brass.

www.warner-tool.com

 

[clowdis]

I need a new .308 sizer die. I had to throw my old one away several years ago but can't remember why. I am currently using a body die followed by a neck sizing die but would like to "get it done" in one step. In looking over sizing dies I came across this one and wondered if there was any magic in it because of the cost. Money doesn't equal magic?

 

[Clancy]

I need a new .308 sizer die. I had to throw my old one away several years ago but can't remember why. I am currently using a body die followed by a neck sizing die but would like to "get it done" in one step. In looking over sizing dies I came across this one and wondered if there was any magic in it because of the cost. Money doesn't equal magic?

I’ve got whidden dies, and one harrel's for my BRA. Both are equal quality, but the whidden is a little more dressed up. That being said, a custom honed Forster is really hard to beat. I have some of those as well.

 

[Delfuego]

I have heard mixed things about the SAC from guys that bought them, but I don't own one. I am in the Harrell's / Honed Forster camp. But take that with a grain of salt, because I can't shoot nearly as good as you guys.

 

[gunsandgunsmithing]

Don’t forget seater die

“The” Seating Die

"The" Seating Die ensures precision seating for reliable bullet alignment, delivering optimal performance for your reloading needs every time.

shortactioncustoms.com

Look at Warner dies

WTC Custom Sizing Die - Custom Made to Fit Your Rifle's Chamber

Each Warner Tool Sizing Die is made custom to match your rifle's exact chamber , CNC manufactured to perfectly fit your 1X fired brass.

www.warner-tool.com

I can't afford to even look at those again!
I began spec'ing chamber reamers around the dimensions of existing dies, whenever possible, several years ago and have never regretted it. I accomplishes the same thing in terms of how much the die sizes the brass but without the additional cost of a custom fitted die. It's a custom fitted chamber! And its that way for every chamber you cut with that reamer. Just a different means to the same end and it just makes sense to me.