Sac 20 Dasher neck/shoulder bushing.

[hot range]

Hey sac doesn't sell a 20 cal neck/shoulder bushing for the 20 Dasher. I talked to them to see if they would custom make me one and they said they would at $75 per but I have to order 3 for them to do it. 4-8 month lead time since it would just go into their normal product schedule. I don't need 3 does anyone else want one or possibly two. If I do this I will also have a reamer for rent if that is what holds you up.

 

[chuckshooter]

if I understand what you are after, it is for the modular sizing die, so their standard .500 outside diameter bushing won't work. or any other brand of bushing either. did you decide on the size, because I often end up with at least 2 in the general area. for instant, for my 20 br, I was using a .228 but it was a little tight, so I just got a .230 and its working better. I do wish I had a .231 just to play with.

​

 

[hot range]

if I understand what you are after, it is for the modular sizing die, so their standard .500 outside diameter bushing won't work. or any other brand of bushing either. did you decide on the size, because I often end up with at least 2 in the general area. for instant, for my 20 br, I was using a .228 but it was a little tight, so I just got a .230 and its working better. I do wish I had a .231 just to play with.

​

Sac dies use a neck/shoulder bushing. It is different then a standard neck bushing. Sac will make me a neck/shoulder bushing however I want it, as long as I order 3, they will cost $75 a piece. Since I'm a fan of necking down farther then some I would probably get a .226 or a .227 neck/shoulder bushing. Then use a .202 expander mandrel to set my neck tension.

 

[hot range]

I have thier standard Dasher sizing die. I already shoot a 6 dasher, 22 Dasher, now I'm swapping my 20 brs over to 20 Dasher for simplicity sake. Not looking for more velocity.

 

[Skunce]

I would like to see SAC add 20 caliber standard bushings that fit Wilson, Redding and Whidden dies to their line up.

 

[Tommie]

Who/What is SAC?

 

[Skunce]

Short Action Customs