Ryan Pierce built 6 brx

[Spendaround]

Just got my 6 BRX back from Ryan Pierce at Piercision rifles.com and After getting on paper at 300 yds I shot two that overlapped then made a scope adjust and shot 5 that measured .700. This got me moist . Then Saturday I had a fellow shooter run a 5 shot string and he threw first one out (cold and dirty) and proceeded to lay next 4 at .680 today Easter Sunday I rana 4 shot 3/4 in group at 300 then checked at 100 and found there was only a 2 and 3/4 in drop from 100 to 300. Decided to reward myself and blew up a 5 hr energy drink at 300 yd and had Easter dinner. Happy Easter everyone mines been great.

 

[Nodak7mm]

Spendaround...

Since you are new, you get a free pass this time... But you cannot talk about your new build without posting pics.. It just aint right..... ;D

Rod

 

[rpierce]

James has asked me to put the pics up for him. I can give you guys a little more info about it. I put a 1.250 straight Brux 6mm 1:8 twist barrel on his savage target action. Hes using the factory stock. He also forgot to mention that those groups he was getting were shot when he was fireforming. The pic of the group has two shots in the top portion of target, he then adjusted the scope and shot 5 shots that measured .700" @300yds.

 

[rpierce]

Pics are too big to put on here format wise. Im not sure how to fix that. Sorry Rod ;D

 

[rpierce]

Heres the pic of the group. top hole was actually 2 sighters in same hole, he made a scope correction and then the others were a 5 shot group @300 while fireforming.

 

[bowfisher]

Very nice !!

 

[Spendaround]

Thanks Bowfisher I'm doing fire forming with 30 g. IMR8208 and federal match primers cause I can't get varget right now. The bullet is a 105 gr hybrid this variant from the recipe I wanted to use is working. A happy accident?