Rings for dovetail

[Gman]

What are ALL of my options for 30mm HIGH, 4 screw rings to mount on a Panda action besides:

John Loh

Harrells

Kelblys.... they only offer a "standard" height. I currently have an older pair of Kelblys 4 screw that are not high enough . The bolt handle will not clear the nub on the magnification ring (set @ 42x) on my NF BR scope.

Morr Accuracy

I guess that is about the full list.

 

[Gman]

Does anyone have a pair of 4 screw, 30mm, HIGH Jewell rings for sale ?

 

[Gman]

Went with the Harrells. Well made & I am very satisfied.

 

[dkhunt14]

Kelbys does make a super high set. I have them on my light guns. Matt

 

[Gman]

Kelbys does make a super high set. I have them on my light guns. Matt

I'll be darn. I did not see them listed on their website about 4 weeks ago.

 

[dkhunt14]

I'll be darn. I did not see them listed on their website about 4 weeks ago.

I went and looked and didn't see them, but I have a couple of sets. I believe they were called super high or extra tall when I got them. Matt

 

[redrockranger]

Checkout BKL rings. Might or might not have what you need.

 

[Gman]

Checkout BKL rings. Might or might not have what you need.

See post #3.

 

[tmwinds]

I had exactly the same problem but I didn't want the extra tall rings because it would cause me to change my shooting position.

I slightly changed the contour of the bolt handle using a dremel tool with a sanding drum and finished up with sandpaper and polished and buffed on a buffing wheel. It took me about 15 minutes and you can't tell it's been touched.

 

[rayporter]

I like the morr offset. but I have one inch tubes. the offset will clear the bolt.