Reversing Panda Anschutz conversion

[ericskennard]

I have a client who has a Kelbly Panda action that was modfied for Palma use. It had a recoil lug atteched to the base of the receiver just like the currant Panda F-Class action.

The Panda was also converted to use an Anschutz trigger group. He wanrs to convert back to a conventional hanger so he can use a JEWELL Trigger.

Does anyone know who might make a trigger hanger to convert the receiver milled for an Anschutz trigger back to a Jewell pattern?

 

[AlNyhus]

I'd talk with Alan Warner at Warner Tool. -Al

 

[Alan Warner]

I have a client who has a Kelbly Panda action that was modfied for Palma use. It had a recoil lug atteched to the base of the receiver just like the currant Panda F-Class action.

The Panda was also converted to use an Anschutz trigger group. He wanrs to convert back to a conventional hanger so he can use a JEWELL Trigger.

Does anyone know who might make a trigger hanger to convert the receiver milled for an Anschutz trigger back to a Jewell pattern?

Eric:
Never had a request for that one. I suppose a plug back is doable. I'd have to look at my drawings and over lay the Rem trigger hanger layout. Having a Panda on hand for original pocket cut location would be handy.
good luck. The Anschutz pocket is offset side to side by about a mm IIRC.
Alan

 

[AlNyhus]

Mr. Warner, thanks for responding to this. Years ago I looked at a Panda Palma gun with an Anschutz trigger fitted and I thought the owner mentioned that you had done the work. It had your style of recoil lug fitted so it seemed to make sense!

Good shootin'. -Al

 

[ericskennard]

Thanks Alan, He told me today that it was originally obtained through Alex Sitman. I might check with him.