Replacement Cutter for old Sinclair NT-CH3

[spclark]

Managed somehow to dull the cutter in my Sinclair NT-CH3 neck turning tool.

They offer two styles (for their newer model NT1000/2000 and another, longer item for the NT3000) on their website but there's no mention of a replacement cutter for the old (circa 2003) model I have.

Will either of these work for me? Sinclair seems to be slow to reply to questions put to them via their website, so I thought I'd ask the folks who frequent this forum....

(Funds are kinda tight right now ;-\ otherwise I'd order a whole new tool )

 

[medicineman]

I would call Sinclair and ask. At one time they had 2 different cutters for the the neck turners. They were ground in mirror image, so one would not work on the other body. I think the cutting angle was different also.

 

[Bobs243Ackley]

We still support the NT-3000 neck turning tool. The NT-3300 is the standard replacement blade that the unit is originally equipped with and will work up to a 30 degree shoulder angle. The NT-3340 is the optional blade that will work with up to a 40 degree shoulder angle. You should be able to enter these item numbers into the search box on the home page of our website, or do not hesitate to call upon one of us at 800-717-8211.

Cordially,
Bob Blaine
Sinclair International, Inc.

 

[Mark Walker in TX]

Hey Steve,

I have a few extra cutters, post of pic of yours (maybe in a caliper so I can see how long it is) and I'll let you know if I have one that will work.