Remage Question

[Sqdqo]

If I build a magnum Remage system with a magnum action/bolt-bolt face can the bolt be replaced with one that has a 270, 30-06, 280, etc bolt face and then used with the same magnum action for say a 6.5 creed or 260 with obviously the proper barrel?

 

[KMart]

should be able to but feeding from the standard internal magazine may be a problem. The feed rails of the magnum action are wider.

 

[6xcshooter]

should be able to. the head space is what matters when you change barrels. also you could use a small rifle bolt-faced bolt as you said "obviously with the proper barrel"