Rem 700 firing assembly pin for shroud/cocking piece?

[Pareto]

I would like to replace the pin that holds my firing pin assembly together, but I can't seem to find it with a search. Rem 700 pins for the firing pin assembly don't pop up and all I see are trigger pins. What is the term for this type of pin and whom do I buy it from?

Thanks for your help.

 

[C.E.Smith043]

I would like to replace the pin that holds my firing pin assembly together, but I can't seem to find it with a search. Rem 700 pins for the firing pin assembly don't pop up and all I see are trigger pins. What is the term for this type of pin and whom do I buy it from?

Thanks for your help.

Firing pin cross pin https://www.midwayusa.com/product/1005033437

Firing Pin Cross Pin

Parts listed here are designed for the Remington Model 700 rifle platform chambered in various calibers unless noted otherwise. MGW offers replacement stocks, barrels, recoil pads, magazines, drop-in triggers, chassis, sights, springs, pins and many other small parts for this modular SA/LA...

www.midwestgunworks.com

 

[Pareto]

Firing pin cross pin

Thanks!

 

[Pareto]

Thanks!

Hmm. Unfortunately Midway says it's discontinued. But Midwest gun works seems to have them.

 

[Old Navy]

I am sure someone here can you tell you the diameter and your local hardware store should have something to make it from.

 

[BoydAllen]

I am sure someone here can you tell you the diameter and your local hardware store should have something to make it from.

Drill bit shank

 

[boltfluter]

I am sure someone here can you tell you the diameter and your local hardware store should have something to make it from.

3/32x.375 long I believe. I use them with my recoil lugs. I have a few laying around if you can't find one.
Paul

 

[NorCalMikie]

3/32x.375 long I believe. I use them with my recoil lugs. "I have a few laying around if you can't find one".
Paul

The MAN!! Few and far between.

 

[WSnyder]

I have a bag full of them. Hardened ground 4140 pins from McMaster 3/32”x7/16” about $10 for 50 or something like that.