cjmill87
Silver $$ Contributor
Cleaning up some odds and ends from the reloading room. Please be sure to take time to fully read the descriptions. All dies are in good condition; some may exhibit minor areas of surface rust unless otherwise noted in the description. I’ve tried to price these appropriately but please feel free to make an offer via PM or email, the worst I can say is no thank you.
Prices posted do not include shipping; I will ship using the cheapest method possible and can provide you an idea of shipping cost if you're interested in an item/s.
These will be listed on other forums so the first posted "I'll take..." (by timestamp) has priority over any PMs or emails. Payment options can be discussed, I'm open to most methods. Please message or email me at cjmill87@yahoo.com if you have any questions; email is fastest.
**Pictures will be posted throughout the day as I get a chance
Dies
Pending 1) RCBS 45 ACP 3 Die Set - $25. Carbide Sizing die, Expander Die and Seating Die.
Pending 2) RCBS 44 SPL/Mag 3 Die Set - $25. Carbide Sizing die, Expander Die and Seating Die with 2 stems.
3) Lyman 38 SPL/ 357 Mag 3 Die Set - $25. Carbide Sizing die, Expander Die and Seating Die.
SPF 4) Lee 9mm 3 Die Set - $20. Carbide Sizing die, Seating Die, Factory Crimp Die and #19 shellholder.
5) Lee 45 ACP Factory Crimp Die - $10.
Pending 6) FW Arms Auto Centering Decapper Die - $20. Older gen model, includes 1 standard size replacement pin. I do not believe the internals are compatible with the current design Dillon is producing but the replacement pins are.
7) Lee 9mm Seating Die - $5. Does not include plastic case.
Pending 8) Lee 300 Blackout Factory Crimp Die and Seating Die - $5. Both dies have a decent amount of surface rust and does not include plastic cases.
Pending 9) Lee Universal Decapping Die - $3. Die has a decent amount of surface rust.
Case Gauges
10) Lyman 40 S&W Pistol Max Cartridge Gauge - $10.
Pending 11) Lyman 223 Rem Case Length Headspace Gauge - $15.
Pending 12) Lyman 300 Blackout Case Length Headspace Gauge - $15.
13) Lyman 338 Lapua Case Length Headspace Gauge - $15.
Pending 14) Lyman 30-06 Ammo Checker - $10
Brass
Pending 15) 44 Remington Magnum – $22. 194 pieces total. 100 are Fiocchi once-fired, the remaining 94 are mixed HS and may have been previously reloaded. All have been tumbled in corn cob media to clean, some have been deprimed but no other processing done.
Sold 16) 30-06 – $10. 43 pieces total. 23 are Remington once-fired, the remaining 20 are mixed HS and may have been previously reloaded. All have been tumbled in corn cob media to clean, some have been deprimed but no other processing done. Will ship with MTM RL-50 50 round ammo box.
Sold 17) 30-30 – $8. 37 pieces total. 20 are Federal once-fired, 12 are Remington once-fired, the remaining 5 are Remington that may have been reloaded. All have been tumbled in corn cob media to clean, some have been deprimed but no other processing done. Will ship with MTM RL-50 50 round ammo box.
Bullets
18) Hornady 30 Caliber 150 grain FMJ-BT– $11. Hornady PN 3037, Quantity 56 remaining from original box of 100.
Prices posted do not include shipping; I will ship using the cheapest method possible and can provide you an idea of shipping cost if you're interested in an item/s.
These will be listed on other forums so the first posted "I'll take..." (by timestamp) has priority over any PMs or emails. Payment options can be discussed, I'm open to most methods. Please message or email me at cjmill87@yahoo.com if you have any questions; email is fastest.
**Pictures will be posted throughout the day as I get a chance
Dies
Pending 1) RCBS 45 ACP 3 Die Set - $25. Carbide Sizing die, Expander Die and Seating Die.
Pending 2) RCBS 44 SPL/Mag 3 Die Set - $25. Carbide Sizing die, Expander Die and Seating Die with 2 stems.
3) Lyman 38 SPL/ 357 Mag 3 Die Set - $25. Carbide Sizing die, Expander Die and Seating Die.
SPF 4) Lee 9mm 3 Die Set - $20. Carbide Sizing die, Seating Die, Factory Crimp Die and #19 shellholder.
5) Lee 45 ACP Factory Crimp Die - $10.
Pending 6) FW Arms Auto Centering Decapper Die - $20. Older gen model, includes 1 standard size replacement pin. I do not believe the internals are compatible with the current design Dillon is producing but the replacement pins are.
7) Lee 9mm Seating Die - $5. Does not include plastic case.
Pending 8) Lee 300 Blackout Factory Crimp Die and Seating Die - $5. Both dies have a decent amount of surface rust and does not include plastic cases.
Pending 9) Lee Universal Decapping Die - $3. Die has a decent amount of surface rust.
Case Gauges
10) Lyman 40 S&W Pistol Max Cartridge Gauge - $10.
Pending 11) Lyman 223 Rem Case Length Headspace Gauge - $15.
Pending 12) Lyman 300 Blackout Case Length Headspace Gauge - $15.
13) Lyman 338 Lapua Case Length Headspace Gauge - $15.
Pending 14) Lyman 30-06 Ammo Checker - $10
Brass
Pending 15) 44 Remington Magnum – $22. 194 pieces total. 100 are Fiocchi once-fired, the remaining 94 are mixed HS and may have been previously reloaded. All have been tumbled in corn cob media to clean, some have been deprimed but no other processing done.
Sold 16) 30-06 – $10. 43 pieces total. 23 are Remington once-fired, the remaining 20 are mixed HS and may have been previously reloaded. All have been tumbled in corn cob media to clean, some have been deprimed but no other processing done. Will ship with MTM RL-50 50 round ammo box.
Sold 17) 30-30 – $8. 37 pieces total. 20 are Federal once-fired, 12 are Remington once-fired, the remaining 5 are Remington that may have been reloaded. All have been tumbled in corn cob media to clean, some have been deprimed but no other processing done. Will ship with MTM RL-50 50 round ammo box.
Bullets
18) Hornady 30 Caliber 150 grain FMJ-BT– $11. Hornady PN 3037, Quantity 56 remaining from original box of 100.
Last edited:
