Hi have just got my 6mm DAsher up and running have measured the cases befor and after sizing after 2 shots here are the results
Fire Formed Lapua case
Base 0.4702 Shoulder 0.4600 Neck 0.2706
Sized in Redding Type S Bushing Full length Die
Base 0.4696 Shoulder 0.4591
Hope this info helps i will also try to attach my chamber reamer print
with little load development it shot under 2" at 600 yards with 36.5gr AR2209,H4350) and 34.0gr AR2208,Varget) Molly Sierra 107gr DO NOT USE MAY BE TO HOT IN YOUR RIFLE will try 37.0 of AR2209 if it will fit in the case as it had a slight accuracy edge also have to play with the Stillar Tuner will post a photo aswell.
Cheers Bill
Australia
Fire Formed Lapua case
Base 0.4702 Shoulder 0.4600 Neck 0.2706
Sized in Redding Type S Bushing Full length Die
Base 0.4696 Shoulder 0.4591
Hope this info helps i will also try to attach my chamber reamer print
with little load development it shot under 2" at 600 yards with 36.5gr AR2209,H4350) and 34.0gr AR2208,Varget) Molly Sierra 107gr DO NOT USE MAY BE TO HOT IN YOUR RIFLE will try 37.0 of AR2209 if it will fit in the case as it had a slight accuracy edge also have to play with the Stillar Tuner will post a photo aswell.
Cheers Bill
Australia
