Recoil pad needed for this:

[joshb]

I bought this a while ago, here. Not sure who made it but I need a rubber pad for it.
Anybody know?

 

[Bc'z]

Cerus maybe

 

[F Class John]

KICK-EEZ makes a lot of grind to fit pads, I'm sure you can find one that's just oversized and then grind down.

KICK-EEZ: Grind To Fit

Grind To Fit Recoil Pads

amzn.to

 

[joshb]

Cerus maybe

It might be made for a Cerus. I searched back thru my PMs but I gave up after 200 or so going back 3 years. It’s 2” wide and 5 1/4” tall.

KICK-EEZ makes a lot of grind to fit pads, I'm sure you can find one that's just oversized and then grind down.

KICK-EEZ: Grind To Fit

Grind To Fit Recoil Pads

amzn.to

I have a bunch of Pachmeyer pads and I could try to grind one down but some have a steel insert that gets exposed if ground too much.

 

[Rsadams]

My favorite is limbsaver...

 

[dryhumor]

I have some pad that’s used in gyms to absorb the weights hitting the floors. If you can’t find what you need I’ll cut a piece and send it. About a 1/2” thick.

 

[joshb]

Cerus maybe

Winner winner chicken dinner! I just sent them an email. After zooming in on some of their pictures, it does suspiciously look like they just ground down a Pachmeyer or such.

 

[Bc'z]

Winner winner chicken dinner! I just sent them an email. After zooming in on some of their pictures, it does suspiciously look like they just ground down a Pachmeyer or such.

I started searching through pictures and besides Cerus a ST1000 is the only option both are taller from peak down than they are up to comb.

Hope that chicken is spicy

 

[Big_Daddy]

I have some pad that’s used in gyms to absorb the weights hitting the floors. If you can’t find what you need I’ll cut a piece and send it. About a 1/2” thick.

Damn that is a great idea!

 

[hoz53]

Winner winner chicken dinner! I just sent them an email. After zooming in on some of their pictures, it does suspiciously look like they just ground down a Pachmeyer or such.

you know pachmayr makes the metal templates the size of the metal insert so a person knows how far they can grind

 

[dryhumor]

Damn that is a great idea!

I’ll stir around when it gets light out and throw a couple of pics up. This stuff is dense, gives just a little, but you aren’t limited to what sizes are available.
Top

Bottom

1/2” thick

I’ve never tried to polish this smooth, but don’t see why it wouldn’t work. The top side has a decent pattern. It has a little more give than a Model 70 XTR red pad. I repurpose stuff all the time…

 

[joshb]

you know pachmayr makes the metal templates the size of the metal insert so a person knows how far they can grind

Huh, all these years and I never knew that. Thanks Kim!

 

[hoz53]

Huh, all these years and I never knew that. Thanks Kim!

glad to help out chief

 

[Leeman]

you know pachmayr makes the metal templates the size of the metal insert so a person knows how far they can grind

Not only that, they have templates on the website that you can print out full size and paste to the back of your stock to check fit and order the correct size, or at least they used to.

 

[10XSHOOTER]

I’ll stir around when it gets light out and throw a couple of pics up. This stuff is dense, gives just a little, but you aren’t limited to what sizes are available.
Top
View attachment 1568380
Bottom
View attachment 1568381
1/2” thick
View attachment 1568382
I’ve never tried to polish this smooth, but don’t see why it wouldn’t work. The top side has a decent pattern. It has a little more give than a Model 70 XTR red pad. I repurpose stuff all the time…

Looks like horse stall matting you can get at your local farm store. Murdocks, Tractor Supply ect.

 

[dryhumor]

Very similar if not the same I think. I got mine some years ago from a guy that fabricated or installed weight lifting stations.

 

[Turpentine]

Limbsaver will soak up the most recoil of any recoil pad I have tried. They also help a bit with muzzle rise and cheek slap without having to cut pitch into the stock. They can be tough to grind. I usually put one in the freezer before grinding. Limbsavers don't last long in hot climates.
Kickeez makes a very good pad that grinds well. I use a lot of them on customers guns.
One of my favorites is Pachmayr. They are easy to grind and do a good job with recoil. They do have the mentioned metal insert you'll get to if you grind to much.

 

[Ledd Slinger]

I don’t think grind to fit pads are gonna work because of the length of the straight sidewall. All the normal grind to fit pads I have ever seen or used over the years have rounded or tapered sides that aren’t going to fully cover the corners on that plate.

So probably gonna have to build something custom from scratch

 

[Ledd Slinger]

Oh wait a minute…Problem solved!!! You’re welcome. Lol!

 

[riverwolf1]

I’ll stir around when it gets light out and throw a couple of pics up. This stuff is dense, gives just a little, but you aren’t limited to what sizes are available.
Top
View attachment 1568380
Bottom
View attachment 1568381
1/2” thick
View attachment 1568382
I’ve never tried to polish this smooth, but don’t see why it wouldn’t work. The top side has a decent pattern. It has a little more give than a Model 70 XTR red pad. I repurpose stuff all the time…

I grind pads for shotguns and the key is to put them in the freezer! Once it’s frozen grinding is easy and there’s no tearing or ripping of the rubber .