SELLING Reamers

[WSMNUT]

From left to right

PTG 28 Nosler - sharpened 1-23. Hasn’t cut a chamber since I had it sharpened
SPF

PTG 6-Dasher 266 neck .135 freebore. It has one chamber on it
SPF

PTG 6-Creed .183 freebore. Has cut probably 5-10 at most.
SPF

JGS 6-BR .268 neck .112 freebore. Chris Mackey reamer. It was his reamer and he said 2-3 chambers. I never cut a chamber with it.
SOLD


PTG 300 Norma Mag Ackley 40 degrees shoulder. 1 chamber


$115 each shipped

 

[rwd3971]

I'll take the dasher

 

[Jimmy Shellenbarger]

you have go gauge for 300 Norma imp and neck diameter and throat

 

[WSMNUT]

you have go gauge for 300 Norma imp and neck diameter and throat

I’m keeping the gauges because I have a std and 35 degrees versions.
I’ve sent a request to PTG for the print.
Part number on the reamer is 55453 REV-A
Says 300 Norma Ackley Imp Match

 

[rdremsek]

I'll take the 28 nosler reamer

 

[WSMNUT]

I'll take the 28 nosler reamer

28 Nosler reamer SPF

 

[Jriley7832]

I will take 6 br

 

[WSMNUT]

I will take 6 br

6BR reamer SPF

 

[Frankm]

I ll take 6 CM if:

Standard neck, don’t want tight neck as have one.

You ll take check and can ship upon cashing

Let me know mailing info by PM if all above meets your approval.

 

[Frankm]

WSMnut, sorry but one other question, assuming 6 CM is floating pilot also?
Thx, Frank

 

[WSMNUT]

WSMnut, sorry but one other question, assuming 6 CM is floating pilot also?
Thx, Frank

It’s a no turn with live pilot

 

[Frankm]

I ll take it if check ok and you can ship after cashing. Please PM me with mailing address if that meets your approval.

Thx WSMnut

 

[Jimmy Shellenbarger]

So the 300 Norma ackley uses standard 300 Norma mag go gauge

 

[WSMNUT]

So the 300 Norma ackley uses standard 300 Norma mag go gauge

the standard go gauge becomes your no go for the Ackley. I have a 300 Norma go (-.004) which is the Ackley go gauge but I am going to keep it because it works with my 35 degree version as well